-
Talon Grip Vise Jaw Inserts by Mitee-Bite
-
Reversible Jaw Inserts (smooth) by Saunders
-
Fixed base plate
-
Movable base plate
-
Adjustable stop
-
3 hex keys (7/32", 5/32", 3/32")
-
Mounting screws and T-nuts
-
Reversible Jaw Inserts:
Both sides are smooth for holding finished parts with minimal marking. Easily reversible in the top jaw (includes 2 inserts and 8 screws). -
Talon Grip Vise Jaw Inserts:
Double-sided serrated inserts for aggressive holding of raw stock. The serrated edge enhances grip strength (includes 2 inserts and 2 screws). -
MB Versagrip Vise Jaws & Inserts:
Serrated on both sides for secure gripping of raw or irregular material. Compatible only with the Versagrip jaws (includes 4 inserts and 4 screws). -
MB Hard Stop:
Designed to fit in the fixed jaw insert slot and used alongside the Talon Grip Inserts for repeatable part positioning. -
Jaw inserts are sold separately. The Standard MB Vise Fixture Base Plates are required to mount any jaw inserts.
-
Although the serrated inserts are intended for raw stock, they may be used on finished surfaces if light clamping pressure is applied and only light machining or engraving is performed.
Adjustable Tailstock 1″ Die Holder
Adjustable Tailstock Custom Tool Holder
#0 Morse to 3/4-16 Chuck Adapter
This adapter fits into the #0 Morse taper of the tailstock to allow Sherline chucks with a 3/4-16 spindle thread to be mounted to the tailstock for holding tools or work. This is a simple and inexpensive way to increase … Continued
Drill Chuck Tool Holder
Drive Belt
This fiber-reinforced urethane drive belt is very tough and long lasting. Properly adjusted, it should last for many years of use. If you should accidentally cut one, it never hurts to have a spare on hand to save down time. The … Continued
2-Axis Lathe DRO with CNC Thrust Collars without Readout Box
3-Axis Lathe DRO with CNC Thrust Collars
1″ End Mill Holder – Blank
Machinist’s Parallel Bar Set
Parallel bars are precision-ground spacers used to elevate a workpiece by a known height while maintaining perfect parallelism with the machine table. This set includes five matched pairs made from 1018 steel, each measuring 2-1/2" long and 1/16" thick, with the following heights: 1/4" • 3/8" • 1/2" • 5/8" • 3/4"
Unlike the imported parallels previously offered, these are manufactured in-house by Sherline. Each bar is waterjet cut from 1/16" 1018 steel, ground to precise height tolerances, and finished with a durable black oxide coating to resist corrosion. This set reflects Sherline’s commitment to accuracy, quality, and American-made craftsmanship.
Chip Guard
Headstock Class 5 Bearing
Our Class 5 (C5) bearings are lifetime-lubricated and feature an adjustable preload for optimal performance. These precision bearings provide superior accuracy, tighter tolerances, smoother and quieter operation, and cooler running temperatures. The bearings are factory-set with a preload of .0002", rated for continuous operation up to approximately 4,000 RPM. For higher-speed applications, up to 10,000 RPM, a slightly looser preload of .0003" may be required.
We do not recommend customers attempt to replace the headstock bearings themselves. Proper bearing installation requires the use of specialized fixtures to ensure perfect spindle and bearing alignment.
If you are unable to press the bearings in yourself, you may return your headstock to our facility for professional replacement. Please contact our customer service department at kim@sherline.com to obtain an RMA number before sending your headstock in for service.
Note: Service fees apply.
Learn more about our specialized tools and procedures for setting the headstock bearing preload: PDF: Replacing Headstock Bearings Video: Setting the Headstock Bearing Preload
Mill Collet Set
Sherline milling collets are specifically designed for use with the Morse #1 internal taper, which is standard on both the Sherline lathe and vertical mill. Due to the shallow angle of the Morse #1 taper, tightening the drawbolt results in significantly greater clamping force compared to WW collets. For this reason, we recommend using these milling collets to securely hold miniature end mills (with 3/16" or 1/4" shanks), #1 and smaller center drills, Dremel® bits (1/8" shank), and a variety of other small cutters.
Inch Mill Collet Set: 1/8", 3/16", 1/4"
Metric Mill Collet Set: 3 mm, 4 mm, 6 mm
Note: Tools held in these collets must have a shank diameter within .001" of the stated size. Because of the shallow taper, the collet will remain tight in the spindle even after loosening the drawbolt. To release it, back the drawbolt out a few turns and tap it lightly to free the collet.
⚠️ CAUTION: When tightening the collet drawbolt with a Tommy bar, be careful not to insert the bar too far into the spindle. Doing so can damage the collet’s taper area. The red arrow in the image below shows an example of this type of damage.
Mill Cutter Arbors
Sherline MB Vise Fixture
The Sherline MB Vise Fixture is designed to locate directly in the T-slots of our mill tables and tooling plates. By aligning the fixed and movable jaws in the T-slots, your mill table or tooling plate becomes the base for the fixture - maximizing usable table length. This setup allows you to securely hold and machine much larger or irregularly shaped parts than traditional vises can accommodate.
Workholding Versatility
The MB Vise Fixture supports a wide range of part shapes through the use of two different sets of interchangeable top jaws:
For square and rectangular stock use the standard top jaws with either:
For round or irregularly shaped material:
Use the MB Versagrip Top Jaws, which fit the same fixed and movable base plates. These jaws accept the MB Versagrip Vise Jaw Inserts by Mitee-Bite. The ¾" round inserts can be rotated within any insert pocket to match and grip a wide variety of part geometries securely.
Standard MB Vise Fixture Includes:
Insert Options:
Notes:
Headstock Riser Plate for 13″ Crosslide
Headstock Riser Plate for 8″ Crosslide
