WW & 10 mm Collet Pot Chucks

Clear selection
    Reset options
SKU: N/A Categories: ,

Product Description

About Sherline Collet Pot Chucks

These collets can be easily machined and are especially designed to hold larger and odd shaped parts. A 1/8″ (3.17mm) dowel pin is included with the collet to grip while the collet face and pin are being machined. The face is drilled 3/16″ deep or less and then bored to exact size to make what is, in effect, a custom chuck for parts too big to be held in regular WW collets. They are used with WW collet adapter and drawbar.

NOTE: Collet pot chucks are designed to hold material only on the face end, not through the collet. Maximum gripping depth is 3/16″ (4.8mm).

Sherline also makes a WW collet with a 1″ blank that is deeper than the pot chucks and is not split. It can also be modified to hold tools or parts for special tasks. See P/N 2083.

warning-symbol
The improper use of machine tools and their accessories can result in serious injury. Before using this tool, thoroughly read the instructions and make sure you understand its proper and safe use.

safety-glasses-symbol

Always wear safety glasses when operating machine tools.


Download PDF 2100 Instructions

Instructions PDF Download