Back to Digital Readouts (DRO)

2-Axis Lathe DRO with CNC Thrust Collars without Readout Box

-

NOTE: If using the DRO on a CNC machine, the axis cannot be moved faster than 15 in/min (381mm/min). The DRO was designed for manual use and it will not give a correct position readout at faster feed rates.

Select the inch/metric option to match the DRO handhweels to your machine’s leadscrew pitch. All ball screw machines use a metric pitch.

Clear selection

  • *Select screw type

    Select the screw type in the check boxes below to receive the correct DRO Tachometer Pickup Decal for your machine.

    Reset options
Add to WishlistRemove from Wishlist
Add to Wishlist
SKU: N/A Categories: ,

Product Description

This kit was developed for those who already have a digital readout installed on their mill and wish to add a DRO to their lathe without duplicating the electronics box. This cost-saving measure allows you to switch the box back and forth between the lathe and mill.

NOTE: The DRO can be ordered on any new machine as a factory installed option. The digital readout handwheels replace the standard handwheels that would normally come with the machine. If you purchase a machine with factory installed DRO, the regular handwheels are not included. If you purchase the DRO as a separate option and install it yourself, you will have the stock handwheels left over.

warning-symbol
The improper use of machine tools and their accessories can result in serious injury. Before using this tool, thoroughly read the instructions and make sure you understand its proper and safe use.

safety-glasses-symbol

Always wear safety glasses when operating machine tools.

Download PDF 8200 Instructions

Instructions PDF Download

81320 2″ Crosslide handwheel, inch (Met. 81322)
81340 2.5″ Leadscrew handwheel, inch (Met. 81342)
81100 Encoder housing w/ wheel and cable
81110 Encoder housing upper cap
81120 Encoder housing body
81130 Encoder housing lower cap
81300 Crosslide thrust collar
81508 Leadscrew thrust collar
81280 #2 x 3/8” Self-tapping pan head screw
81270 2-56 x 3/8″ pan head Phillips screw
81500 Tachometer encoder & cable asby.
81510 Tachometer pickup decal
40440 #2 x 1/4” Self-tapping pan head screw
81310 Encoder star gear
81080 (2) Black tie-wrap

DRO Handwheel Installation

Related products

3-Axis Lathe DRO
Select the inch/metric option to match the DRO handhweels to your machine's leadscrew pitch. All ball screw machines use a metric pitch.
$464.56

-

Select options This product has multiple variants. The options may be chosen on the product page
Add to WishlistRemove from Wishlist
Add to Wishlist
Mill Digital Readout (DRO)
Select the inch/metric option to match the DRO handhweels to your machine's leadscrew pitch. All ball screw machines use a metric pitch.
$453.33

-

Select options This product has multiple variants. The options may be chosen on the product page
Add to WishlistRemove from Wishlist
Add to Wishlist
Lathe DRO with CNC Thrust Collars
NOTE: If using the DRO on a CNC machine, the axis cannot be moved faster than 15 in/min (381mm/min). The DRO was designed for manual use and it will not give a correct position readout at faster feed rates. Select the inch/metric option to match the DRO handhweels to your machine's leadscrew pitch. All ball screw machines use a metric pitch.
$392.16

-

Select options This product has multiple variants. The options may be chosen on the product page
Add to WishlistRemove from Wishlist
Add to Wishlist
2-Axis Lathe DRO
Select the inch/metric option to match the DRO handhweels to your machine's leadscrew pitch. All ball screw machines use a metric pitch.
$392.16

-

Select options This product has multiple variants. The options may be chosen on the product page
Add to WishlistRemove from Wishlist
Add to Wishlist