Hard stop for the MB Vise Fixture with Talon Grips (P/N 3552-35526).
What’s included in each set:
- One vise fixture hard stop
- One socket head cap screw (not shown)
Back to Mill Vise
We have temporarily stopped ALL SALES through our website, by phone or by email, of our products to allow us to catch up on our current orders. Thank you for your patience and we apologize for any inconvenience.
Image shown is a representation only. Actual product may vary.
MB Vise Fixture Hard Stop
Related products
-
Talon Grip Vise Jaw Inserts by Mitee-Bite
-
Reversible Jaw Inserts (smooth) by Saunders
-
Fixed base plate
-
Movable base plate
-
Adjustable stop
-
3 hex keys (7/32", 5/32", 3/32")
-
Mounting screws and T-nuts
-
Reversible Jaw Inserts:
Both sides are smooth for holding finished parts with minimal marking. Easily reversible in the top jaw (includes 2 inserts and 8 screws). -
Talon Grip Vise Jaw Inserts:
Double-sided serrated inserts for aggressive holding of raw stock. The serrated edge enhances grip strength (includes 2 inserts and 2 screws). -
MB Versagrip Vise Jaws & Inserts:
Serrated on both sides for secure gripping of raw or irregular material. Compatible only with the Versagrip jaws (includes 4 inserts and 4 screws). -
MB Hard Stop:
Designed to fit in the fixed jaw insert slot and used alongside the Talon Grip Inserts for repeatable part positioning. -
Jaw inserts are sold separately. The Standard MB Vise Fixture Base Plates are required to mount any jaw inserts.
-
Although the serrated inserts are intended for raw stock, they may be used on finished surfaces if light clamping pressure is applied and only light machining or engraving is performed.
Sherline MB Vise Fixture
The Sherline MB Vise Fixture is designed to locate directly in the T-slots of our mill tables and tooling plates. By aligning the fixed and movable jaws in the T-slots, your mill table or tooling plate becomes the base for the fixture - maximizing usable table length. This setup allows you to securely hold and machine much larger or irregularly shaped parts than traditional vises can accommodate.
Workholding Versatility
The MB Vise Fixture supports a wide range of part shapes through the use of two different sets of interchangeable top jaws:
For square and rectangular stock use the standard top jaws with either:
For round or irregularly shaped material:
Use the MB Versagrip Top Jaws, which fit the same fixed and movable base plates. These jaws accept the MB Versagrip Vise Jaw Inserts by Mitee-Bite. The ¾" round inserts can be rotated within any insert pocket to match and grip a wide variety of part geometries securely.
Standard MB Vise Fixture Includes:
Insert Options:
Notes: