0
items:
$0.00
Back to Collet Accessories
ER-16 Collet Nut Spanner Set
ER-16 Collet Nut Spanner Set
Product Description
About the ER-16 spanner set
The Sherline ER-16 Collet nut spanner set includes two wrenches. One has a pin that engages one of the holes in the Sherline spindle to keep it from turning while the nut is tightened. The other is a hex wrench sized to fit the special ER-16 nut (nut not included). This wrench eliminates the need for the proper size metric wrench and a Tommy bar when loosening or tightening the ER-16 collet nut. The pin tool provides a better grip in your hand and better leverage than the Tommy bar. The tools are cut from a 1/4″ steel plate and have a tough, black oxide coating to keep them from rusting.
The P/N 65027 set is used to adjust the ER-16 collet nut on Sherline machines fitted with an ER-16 spindle. Click on the image for a larger view.
|
|
Always wear safety glasses when operating machine tools. |
|
Download 65027 PDF Instructions
|
Related products
3.1″ ER-16 3-Jaw Chuck
For use on the ER-16 headstock only
Not for use on the standard headstock that comes on all Sherline Machines
3.1″ 4-Jaw Chuck – ER-16
For use on the ER-16 headstock only
Not for use on the standard headstock that comes on all Sherline Machines
ER-16 Headstock and Motor Unit
The 3308 would replace the standard headstock, motor and speed control assembly that come on Sherline machines.
The ER-16 nut that ships with your order may be plain or have a black oxide finish.