0
items:
$0.00
Back to Misc. Tools
Chip Guard
-
Product Description
About the Chip Guard
The chip guard mounts to the headstock and swings down over the faceplate or chuck. It is made of a tough, clear polycarbonate material, so you can see what you are doing and still be protected from flying chips. It swings easily out of the way for setups. It is not recommended as a replacement for safety glasses, but rather as an additional safety feature. It also helps keep your work area cleaner by containing chips in a smaller space. If you work on your kitchen table, this accessory will be greatly appreciated by your family.
ALWAYS WEAR SAFETY GLASSES WHEN OPERATING POWER TOOLS.
FIGURE 1: Shows the chip guard installed on a lathe.
|
|
Always wear safety glasses when operating machine tools. |
Download PDF Assembly and Instruction Guide
| 32100 | 10-32 Hex Nut |
|---|---|
| 40330 | 10-32 X 5/8″ SHC Screw |
| 40700 | 10-32 X 1-3/4″ SHC Screw |
| 43610 | Chip Guard |
| 43620 | Chip Guard Hinge |
Related products
Super-Lube Multi-Purpose Synthetic Grease 3oz
Material Safety Data Sheets (MSDS) and more data about the lubricants can be found on the Super Lube web site at www.super-lube.com.
-
Add to cart