CNC Rotary Table with 36V Stepper Motor

-

This CNC rotary table works only with the MASSO G3 Touch Controller.

Frequently Bought Together

3.1" 3-Jaw Chuck

Includes 2 tommy bars, not pictured

Product Description

The 4th Axis for your Accu-Pro VMC Ball Screw Mill with MASSO Touch Controller

The CNC Rotary Table with 36V Stepper Motor* comes equipped with an A-axis output cable ready to drive a 4th rotary axis. This rotary table is all you need to turn your Sherline Accu-Pro mill into a 4-axis machine. Just plug the A-axis cable from the stepper motor into the A-axis input on the MASSO G3 touch controller. The software handles G-code for the A-axis, and numbers entered after the letter “A” in the code represent rotational degrees.

The CNC rotary table includes a MASSO homing sensor

*NOTE: This CNC rotary table works only with the MASSO G3 Touch Controller. The 36V stepper motor is powered by the 36V power supply from the MASSO controller.

NOTE: We are stating the following weight limits for our rotary tables for continual use. Click on the Video tab above to see examples of different weights and uses for our rotary tables.

  • Horizontal orientation—50 lbs.
  • Vertical orientation—30 lbs.
  • Vertical rotational torque—6 foot/lbs. (meaning it can lift a 6 lb. weight when suspended 12″ away from the center of the rotary table)

The rotary tables can hold more weight when not under a continual load.

warning-symbol
The improper use of machine tools and their accessories can result in serious injury. Before using this tool, thoroughly read the instructions and make sure you understand its proper and safe use.

safety-glasses-symbol

Always wear safety glasses when operating machine tools.

Download PDF 3700-CNC Ready Instructions

Instructions PDF Download

Download PDF 3700 Instructions

Instructions PDF Download

Download PDF Troubleshooting CNC Rotary Table Problems

Instructions PDF Download

Download PDF CNC Rotary Table Maintenance Instructions

Instructions PDF Download

Download PDF MASSO Rotary Table Limit Switch Interference on the Tilting Angle Table Instructions

Instructions PDF Download

Download PDF Sherline/MASSO 36V Closed-Loop Stepper Motor Specifications
Instructions PDF Download

CNC Rotary Table in Action

Rotary Table Weight Capacity Specifications
Horizontal orientation 50 lbs.
Vertical orientation 30 lbs.
Vertical rotational torque 6 foot/lbs. (meaning it can lift a 6 lb. weight when suspended 12″ away from the center of the rotary table)
Mechanical backlash 0.2° or less
Rotary Indexer Specifications
Table Size 4″ diameter by 2″ height
Part mounting Provisions Center thread including chuck adapter and 4 T-slots
Rotation Speed 1°/sec. to 66°/sec.
Resolution 28,800 steps per revolution (±.006° per step)
Backlash Compensation Programmable
Stepper Motor Closed-loop with integrated drive. 169.934 oz-in, 2 Amp, NEMA #23 Frame-size, Step angle of .9° (400 steps/rev), 800 pulses/rev, 530 RPM (maximum).
Part No. Description Quantity
10930 3/8″ Bearing 2
30561 10-32 T-nut 2
3058 4-Jaw Hold Down Set Assembly 1
37090 Rotary Table Chuck Adapter, 3/8-16 to 3/4-16 1
37100 Rotary Table Base 1
37110 Rotary Table Top 1
37121 CNC Rotary Table Worm Housing (Not sold separately) N/A
37131 CNC Rotary Table Worm Shaft (Not sold separately) N/A
37122 CNC Rotary Table Worm Housing Assembly (P/Ns 37121, 37131) 1
37125 CNC Rotary Coupling w/8mm Bore 1
37124 CNC Rotary Table Coupling Adapter 1
37150 Oil Plug 1
37160 Preload Nut 1
37170 Lock Pin 1
37200 Button Head Screw, 10-32 X 3/8″ 2
37210 Hold Down Tab 1
37220 Button Head Screw, 6-32 X 1/4″ 1
40330 10-32 X 5/8″ SHCS 2
40420 Headstock Bearing 1
40510 SHC Screw, 10-32 X 3/8″ 1
40520 Cup Point Set Screw, 10-32 X 3/16″ 4
40540 Cone Point Set Screw, 5/16-18 X 3/4″ 1
40660 Washer 1
40670 10-32 X 1/2″ SHCS 2
50120 Pointer 1
12050 SHC Screw, 8-32 X 3/8″ 4
87510 CNC Rotary Table Stepper Motor Mount 1
87140 MASSO 36V Stepper Motor, 169.934 oz-in, 2 Amp, NEMA #23 Frame-size 1

Click the P/N below to download a zipped version of the IGS 3D CAD file. You will need to extract the zip file before viewing the IGS file.
8730 3D IGS model
You need an IGS viewer to view .igs files. CLICK HERE to download a FREE IGS viewer.