- Four Versagrip jaw inserts
- Four socket head cap screws (not shown)
- Two Versagrip top jaws
- Four 82° screws
3C Collet Closer base – Chucker Lathe
3C Collet Closer base – Leadscrew Lathe w/Riser
M1 Main Spindle Encoder Pulley-One Speed Pulley
MB Vise Fixture Hard Stop
Hard stop for the MB Vise Fixture with Talon Grips (P/N 3552-35526). What’s included in each set: One vise fixture hard stop One socket head cap screw (not shown)
MB Vise Smooth Jaw Inserts (Set of 2)
Our supplier has made a design change to these jaw inserts. They are no longer produced with a serrated side; the new version is smooth on both sides.
In addition, the overall length has been changed from 4.00″ to 3.76″. The mounting hole size and location remain unchanged, so the inserts will still fit and function with our top jaws. However, because of the shorter length, the ends of the inserts will sit approximately 0.120″ inside the edge of the top jaw on each side.
MB Vise Versagrip Jaw Inserts
These inserts have two serrated sides and bite into the part surface for holding raw material. They are only compatible with the Versagrip top jaws (P/N 35535).
What's included in each set:
MB Vise Versagrip Top Jaws
The MB Versagrip Top Jaws are used for holding round or oddly shaped stock. These top jaws use the MB Versagrip Vise Jaw Inserts (P/N 35529) made by Mitee-Bite*. You can place the jaw inserts into any insert pockets in the MB Versagrip top jaws to accommodate differently shaped parts.
*NOTE: The MB Versagrip Vise Jaw Inserts are sold separately. What's Included:
Pie Master Jaws
NOTE:Â To customers who are buying these jaws for an existing chuck, please measure the width of your current chuck jaws with a pair of mics so we can grind your master jaws to match. State your current jaw width in … Continued
Saddle Nut Oiler
Sherline 3C Collet Spindle Headstocks
Sherline 9/16″ Through-Hole Spindle Headstocks
Sherline ER-16 Spindle Headstocks
Sherline Standard Morse #1 Taper Spindle Headstocks
Ball Screw Coupling 8 mm – Male Mount
Ball screw coupling with an 8 mm shaft for Accu-Pro machines.
Ball Screw Handwheels
Zero Adjustable Handwheels for ball screw machines. The ball screws are only available in metric, so the numeric graduations on the handwheel dials are 2mm per revolution and .02mm per line.
