55° RH and LH Tool Holders w/7° Relief Angle
These holders are the same as our 2256 and 2257 with one difference. Our 2256 and 2257 use a DPMT insert which has an 11° relief angle. These holders use a DCMT insert which has a 7° relief angle. As with many insert holders and inserts, they change over time. The original DPMT insert that we use with the 2256 and 2257 holders has become less available, and offers less choices for various different chip breaker designs. The DCMT insert is readily available with a wide selection of different insert styles. Note: Our customers who have been cutting brass have found that our uncoated DPMT (11°) insert (with the straight groove chip breaker) works very well and gives them an excellent finish. These inserts are no longer available. This is why we have added our new holders with a 7° relief angle. Insert P/N 7613 is a replacement for these inserts. This insert cuts brass well and also gives an  excellent finish The coated inserts with different chip breaker designs are still available in both the DPMT and DCMT inserts.  

Select options
Carbide Insert LH 55° 3/8″ Boring Bar w/2 Flats
The straight groove chip breaker as shown in the picture is no longer available. The actual insert will have the spider web chip breaker as shown here Includes Torx driver and 55° carbide insert
$83.32 Add to cart
Carbide Insert LH 80° 3/8″ Boring Bar w/2 Flats
The straight groove chip breaker as shown in the picture is no longer available. The actual insert will have the spider web chip breaker as shown here Includes Torx driver and 80° carbide insert
$83.32 Add to cart
Carbide Insert RH 55° 3/8″ Boring Bar w/2 Flats
The straight groove chip breaker as shown in the picture is no longer available. The actual insert will have the spider web chip breaker as shown here Includes Torx driver and 55° carbide insert
$83.32 Add to cart
Carbide Insert RH 80° 3/8″ Boring Bar w/2 Flats
The straight groove chip breaker as shown in the picture is no longer available. The actual insert will have the spider web chip breaker as shown here Includes Torx driver and 80° carbide insert
$83.32 Add to cart
Quick-change Carbide Insert Tool Holder
Quick-change Carbide Insert Tool Holder
Quick-Change Carbide Insert Tool Holder
(Cutting tools are not included)
$108.60 Add to cart
2258_Carbide-Insert-Tool-Holders
2258_Carbide-Insert-Tool-Holders
55° RH and LH Tool Holders w/Carbide Inserts
The straight groove chip breaker as shown in the picture is no longer available. The actual insert will have the spider web chip breaker as shown here
From: $54.30 Select options This product has multiple variants. The options may be chosen on the product page
80° RH and LH Tool Holders w/Carbide Inserts
The straight groove chip breaker as shown in the picture is no longer available. The actual insert will have the spider web chip breaker as shown here
From: $60.33 Select options This product has multiple variants. The options may be chosen on the product page
2261_Inserted-Tip-Carb-Boring-Bars
2261_Inserted-Tip-Carb-Boring-Bars
RH 55° and 80° 3/8″ Boring Bars w/Carbide Inserts
The straight groove chip breaker as shown in the picture is no longer available. The actual inserts will have the spider web chip breaker as shown here & here
From: $72.40 Select options This product has multiple variants. The options may be chosen on the product page
55° Carbide Insert
Image shown is a representation, and could be different from the actual product.
$14.65 Add to cart
55° Carbide Insert-10 Pack
Image shown is a representation, and could be different from the actual product
$126.70 Add to cart
80° Carbide Insert
Image shown is a representation, and could be different from the actual product, for example uncoated products will not have the gold colored coating and will be silver in color. See the chart below for the difference between coated and uncoated inserts.
$12.07 Select options This product has multiple variants. The options may be chosen on the product page
80° Carbide Insert-10 Pack
Image shown is a representation, and could be different from the actual product, for example uncoated products will not have the gold colored coating and will be silver in color. See the chart below for the difference between coated and uncoated inserts.
$108.31 Select options This product has multiple variants. The options may be chosen on the product page
From: $29.02 Select options This product has multiple variants. The options may be chosen on the product page
2265_Ceramic-Insert-Holder
2265_Ceramic-Insert-Holder
Ceramic Insert Tool Holder
Negative Rake Ceramic Insert Tool Holder, includes a hold-down screw and hex wrench.
$72.40 Add to cart