$144.80
Select options
This product has multiple variants. The options may be chosen on the product page
$181.00
Select options
This product has multiple variants. The options may be chosen on the product page
Cut Off Tool Holder Body
Body only. Does not include blade, screws, washer or t-nut
$20.92
Select options
This product has multiple variants. The options may be chosen on the product page
Drive Belt
This fiber-reinforced urethane drive belt is very tough and long lasting. Properly adjusted, it should last for many years of use. If you should accidentally cut one, it never hurts to have a spare on hand to save down time. The … Continued
2-Axis Lathe DRO
Select the inch/metric option to match the DRO handhweels to your machine's leadscrew pitch. All ball screw machines use a metric pitch.
Lathe DRO with CNC Thrust Collars
NOTE: If using the DRO on a CNC machine, the axis cannot be moved faster than 15 in/min (381mm/min). The DRO was designed for manual use and it will not give a correct position readout at faster feed rates.
Select the inch/metric option to match the DRO handhweels to your machine's leadscrew pitch. All ball screw machines use a metric pitch.
2-Axis Lathe DRO with CNC Thrust Collars without Readout Box
NOTE: If using the DRO on a CNC machine, the axis cannot be moved faster than 15 in/min (381mm/min). The DRO was designed for manual use and it will not give a correct position readout at faster feed rates.
Select the inch/metric option to match the DRO handhweels to your machine's leadscrew pitch. All ball screw machines use a metric pitch.
2-Axis Lathe DRO without Readout Box
Select the inch/metric option to match the DRO handhweels to your machine's leadscrew pitch. All ball screw machines use a metric pitch.
3-Axis Lathe DRO
Select the inch/metric option to match the DRO handhweels to your machine's leadscrew pitch. All ball screw machines use a metric pitch.
Mill Digital Readout (DRO)
Select the inch/metric option to match the DRO handhweels to your machine's leadscrew pitch. All ball screw machines use a metric pitch.
Mill DRO with CNC Thrust Collars
NOTE: If using the DRO on a CNC machine, the axis cannot be moved faster than 15 in/min (381mm/min). The DRO was designed for manual use and it will not give a correct position readout at faster feed rates.
Select the inch/metric option to match the DRO handhweels to your machine's leadscrew pitch. All ball screw machines use a metric pitch.
Mill DRO without Readout Box
Select the inch/metric option to match the DRO handhweels to your machine's leadscrew pitch. All ball screw machines use a metric pitch.
Z-Axis DRO Handwheel Package
Includes Z-Axis handwheel, encoder unit, and thrust collar.
Select the inch/metric option to match the DRO handwheels to your machine's leadscrew pitch. All ball screw machines use a metric pitch.
ER Collet-to-Sherline Chuck Arbor
When using a large mill or lathe with 5C, ER or other large collets it is sometimes helpful to have a way to change to a small chuck quickly. These adapters have either a 1/2" shank (10660) or a 5/8" shank (10650). On the other end is a 3/4-16 thread that accepts any Sherline 2.5" or 3.1" chuck. This allows you, without changing your spindle or going to another machine, to quickly install a Sherline 3- or 4-jaw chuck. Just insert the shank of the adapter attached into a 1/2" or 5/8" collet. Now you can chuck up parts that could not be easily held in a collet. T.I.R. of the adapter is specified to be 0.0005" (0.013mm) or less. The unhardened steel adapters have a black oxide finish to prevent rust.
$12.34
Select options
This product has multiple variants. The options may be chosen on the product page