- 80290 - is used the on LM2-2000 scale (0-2000 lbs.)
- 80300 - is used on the LM2-5000 scale (0-5000 lbs.)
Super-Lube Multi-Purpose Synthetic Grease 3oz
This grease contains PTFE (Teflon) and serves as a clear, non-toxic, multi-purpose lubricant. Super Lube is an NLGI grade 2, heavy-duty lubricant compatible with most other greases. It provides superior adhesion and outlasts conventional lubricants by 40–100%.
Super Lube is dielectric, water-resistant, non-staining, and classified as a USDA H-1 food-grade lubricant. It performs reliably across a broad temperature range of –45°F to 450°F and will not run, drip, dry out, melt, separate, or form gummy residues.
Recommended applications include leadscrews, behind handwheels where they contact thrust surfaces, dovetails on lathes and mills, as well as gears, hinges, and bearings.
For Material Safety Data Sheets (MSDS) and additional product information, visit www.super-lube.com.
NIKX-STIKX Metal-Cutting Compound
NIKX-STIKX is a 2.2-ounce solid metal-cutting compound designed to enhance cutting performance. Unlike traditional lubricants, it is a wax-based compound applied directly to cutting tools and saw blades to reduce friction and promote smoother cuts. Its solid form eliminates the mess and spillage associated with liquid coolants.
Ideal for use on drills, end mills, parting tools, and more, NIKX-STIKX helps extend tool life and improve cutting efficiency. It is also a trusted solution used daily in the Sherline manufacturing shop.
Saddle Nut
X-Axis Slide Screw Insert
This slide screw insert nut works on the X-axis of both the standard leadscrew lathes and mills.
90° 30TPI Left Hand Spiral Knurl
BRAND FORM ROLL STYLE Circular Pitch TOOTH PATTERN Left Hand TOOL MATERIAL High Speed Steel DIAMETER 1/2″ PITCH 30 WIDTH 3/16″ HOLE SIZE 3/16″ FINISH COATING Lapped Tooth Finish HARDNESS 58 to 60 RC NORMAL CIRCULAR TPI 30 WHEEL DIAMETER 3/16″ … Continued
90° 30TPI Right Hand Spiral Knurl
BRAND FORM ROLL STYLE Circular Pitch TOOTH PATTERN Right Hand TOOL MATERIAL High Speed Steel DIAMETER 1/2″ PITCH 30 WIDTH 3/16″ HOLE SIZE 3/16″ FINISH COATING Lapped Tooth Finish HARDNESS 58 to 60 RC NORMAL CIRCULAR TPI 30 WHEEL DIAMETER 3/16″ … Continued
Suspended Scale Replacement Gauge
Replacement gauges for your Sherline Suspended Hydraulic scale
Gauges Read in Pounds
T-Slot Cutter (Carbide, 3/8″ Shank)
T-slot nominal dimensions****Note: The T-slots are extruded into the material. Table surfaces are machined for flatness, but the slots themselves require no additional finishing processes. Slot width, top: .25″ T width, bottom: .40″ Upper slot depth: .10″ T Slot depth: … Continued
Trailer Scale Replacement Gauge
Replacement gauges for your Sherline Trailer Tongue Weight scale and the 5th-Wheel Trailer Hitch Weight scale. Gauges Read in Pounds and Kilograms All gauges have a dual-scale gauge that reads in pounds on the outside of the ring and the … Continued
