24″ CNC Lathe Bed
CNC Mill Table
The 13″ CNC Mill Table comes pre drilled with 2 8-32 mounting holes for a stepper motor mount. Table is not engraved.
Mill Column – Manual
Lathe Vertical Milling Column – CNC Ready
NOTE: CNC-ready machines cannot be operated manually unless double-shaft stepper motors are installed.
Mill Column – CNC Ready
Deluxe Mill Column – Manual
NexGen Mill Column – CNC Ready
Motion Controller Power Supply
Input: 100-240VAC 50/60Hz 1.2A Output: 24V 1.5A Automatically adjusts for global use (220–240V)
Stepper motor driven 11″ Leasdscrew with Linear Controller
When paired with Sherline’s programmable linear controller, this setup provides a complete, self-contained single-axis CNC power feed. The power supply, mounting screws, and anti-backlash nut (not shown) are included. An additional cable is provided for use with a limit switch or for “daisy-chaining” multiple controllers.
Leadscrew & Handwheel Graduations
-
Inch: 1/4-20 leadscrew, 50 divisions
-
Metric: 6.3 x 1 mm leadscrew, 100 divisions
Controller Power Supply
The included power supply is compatible with 110–240 VAC and automatically switches between voltages for use in countries with 220–240V power. (The original version of this power supply was 110 VAC only.)
CNC Linear Controller with 24″ Leadscrew
This CNC power feed includes a stepper motor mount and a 24" leadscrew for use with Sherline lathes that are not CNC-Ready. The stand-alone controller is programmable through its integrated keypad and directly controls the attached stepper motor, which can be mounted to drive the leadscrew of the lathe.
An 8-pin mini-DIN cable allows multiple controllers to be connected in a “daisy-chain” configuration. Controllers can signal one another to operate in sequence, enabling complex multi-axis movements without requiring a computer or master CNC controller. The controller can also be used in combination with existing CNC systems. Each unit is user-programmable with two independent programs of up to 40 steps each. For each step, you can set travel distance, direction, feed rate, and whether the sequence pauses or proceeds automatically.
The linear controller can also be daisy-chained with Sherline’s rotary controller (P/N 8700) to combine rotary and linear movements. This makes it easy to perform advanced tasks—such as gear cutting—without any CNC programming knowledge beyond the keypad interface.
Advantages of Using a Power Feed:
-
Provides a constant feed rate for a smoother, more consistent surface finish
-
Reduces the chance of errors caused by miscounting handwheel revolutions
-
Eliminates physical effort for long cuts or returning the saddle to the starting position
Programming is quick and straightforward. Stored programs can be executed repeatedly at the touch of a button with high precision.
Included with the CNC Linear Controller:
-
Linear controller with integrated keypad
-
Power supply
-
#23 frame size stepper motor
-
Cables
-
Stepper motor mount
-
24" leadscrew
-
Dampened coupling
-
Preload nuts
-
Drill guide block
-
Complete installation and operating instructions
Power Supply Compatibility:
The included power supply operates on 110–240 VAC and automatically adjusts for international use (220–240V). Earlier versions of this product were supplied with a 110 VAC-only power supply.
CNC Linear Controller – Z-Axis
This stand-alone controller is programmable from its keypad and controls the stepper motor's function to which it is attached.
An 8-pin mini-DIN cable can be used to connect multiple units in a "daisy chain." The units can signal each other to work in sequence, allowing multiple movements to be accomplished without using a computer or master CNC controller. They can also be used in conjunction with existing CNC controllers. The controller is user-programmable with two separate programs of up to 40 operations each. In each block, you can control distance, direction, speed, and whether the program pauses or proceeds to the next block.
The linear controller can also be "daisy-chained" with Sherline's rotary controller to achieve rotary and linear movement combinations. This makes it easy to set up for relatively sophisticated operations like cutting gears without having to know anything about CNC programming beyond what is entered from these simple keypads.
Using a power feed offers several advantages:- A constant feed rate gives a smoother, more consistent final finish
- The chance of errors due to miscounting handwheel revolutions is reduced
- No physical effort is needed for long cuts or returning the saddle to its starting position after a cut is complete
Programming is quick and simple, and programs are repeated at the touch of a button with high accuracy.
Items included with the CNC Linear Controller:- Linear Controller w/Keypad
- Power Supply
- #23 Frame Size Stepper Motor
- Cables
- Stepper motor mount
- Z-axis Leadscrew
- Dampened coupling
- Preload nuts
- Drill guide block and complete installation and use instructions
The controller power supply is 110-240VAC compatible. It automatically switches from 110V to 240V for countries with 220-240 volt electrical current. The original power supply that we offered with this product was 110 VAC only.
CNC Linear Controller with Stepper Motor
This stand-alone controller is fully programmable via its integrated keypad and directly controls the stepper motor to which it is connected. The stepper motor can be applied to any axis of a CNC-Ready Sherline machine.
An 8-pin mini-DIN cable allows multiple controllers to be connected in a “daisy-chain” configuration. Controllers can signal one another to operate in sequence, enabling complex, multi-axis movements without the need for a computer or master CNC controller. The system can also be used alongside existing CNC controllers. Each controller stores two independent programs, with up to 40 operations per program. For each operation, you can define travel distance, direction, feed rate, and whether the sequence pauses or proceeds to the next step.
The linear controller can also be daisy-chained with Sherline’s rotary controller, enabling coordinated rotary and linear motion. This allows users to easily perform advanced operations—such as gear cutting—without requiring CNC programming skills beyond simple keypad inputs.
Included with the CNC Linear Controller:
-
Linear controller with keypad
-
Power supply
-
#23 frame size stepper motor
-
Cables
-
Complete instructions
Note: To add CNC linear control to an axis on a Sherline machine that does not have a stepper motor mount, see P/N 8850.
Power Supply Compatibility:
The included power supply operates on 110–240 VAC and automatically adjusts for global use (220–240V). Earlier versions of this product shipped with a 110 VAC-only power supply.
