CNC Linear Controller with 15″ Leadscrew

-

Clear selection
SKU: N/A Category: Tag:

Product Description

About the Linear Controller

This linear controller comes with a stepper motor mount and 15″ leadscrew for machines that are not CNC-Ready. This stand-alone controller is programmable from its keypad and controls the function of the stepper motor to which it is attached. The stepper motor may be mounted to drive the leadscrew of a Sherline lathe (A separate kit is available for the 4400-series lathe leadscrew as P/N 8880 [24″].)

An 8-pin mini-DIN cable can be used to connect multiple units in a “daisy chain”. The units can signal each other to work in sequence, allowing multiple movements to be accomplished without the use of a computer or master CNC controller. They can also be used in conjunction with existing CNC controllers. The controller is user-programmable with two separate programs of up to 40 operations each. In each block you can control distance, direction, speed, and whether the program pauses or proceeds to the next block.

The linear controller can also be “daisy-chained” with Sherline’s rotary controller (P/N 8700) to achieve combinations of rotary and linear movement in sequence. This makes it easy to set up for relatively sophisticated operations like cutting gears without having to know anything about CNC programming beyond what is entered from these simple keypads

Using a power feed offers several advantages:

  1. A constant feed rate gives a smoother, more consistent final finish
  2. The chance of errors due to miscounting handwheel revolutions is reduced
  3. No physical effort is needed for long cuts or returning the saddle to its starting position after a cut is complete

Programming is quick and simple, and programs are repeated at the touch of a button with high accuracy.

Items included with the CNC Linear Controller:

  • Linear Controller w/Keypad
  • Power Supply
  • #23 Frame Size Stepper Motor
  • Cables
  • Stepper motor mount
  • 15″ Leadscrew
  • Dampened coupling
  • Preload nuts
  • Drill guide block and complete installation and use instructions

About the Controller Power Supply Current

The controller power supply is 110-240VAC compatible. It automatically switches from 110V to 240V for countries with 220-240 volt electrical current. The original power supply that we offered with this product was 110 VAC only.

warning-symbol

The improper use of machine tools and their accessories can result in serious injury. Before using this tool, thoroughly read the instructions and make sure you understand its proper and safe use.

safety-glasses-symbol

Always wear safety glasses when operating machine tools.

Download 8850-Inch PDF Instructions

Instructions PDF Download

Download 8851-Metric PDF Instructions

Instructions PDF Download

Download LATHE CNC Upgrade Instructions

Instructions PDF Download

Power Supply Input: 115 VAC 50/60 Hz, Output: 24V, 1 Watt
Stepper Motor 100 oz-in, 2 Amp, #23 Frame size, 400 steps per revolution
Speed 1″/min. to 25 in/min (programmable)
Distance from 0.0005″ to 9.9995″ in steps of 0.0005″
Backlash Compensation Programmable
Part No. Description Quantity
12050 8-32 x 3/8″ SHCS 4
40520 10-32 x 3/16″ Cup Point Set Screw 1
67024
67025
CNC-15″ Lathe Bed Leadscrew (Inch)
CNC-15″ Lathe Bed Leadscrew (Metric)
1
67040 CNC-Leadscrew Thrust Bed Hold-down 1
67102 Stepper Motor Mount 1
67104 CNC Preload Nut (RH-Fine) 1
671052 CNC Coupling 1
67111 8-32 x 7/8″ SHCS 2
67115 5-40 x 7/8″ SHCS 1
67117 CNC Template, Slide Bushing 1
67120 Stepper Motor Preload Bearing 2
8800
8810
Linear controller with Stepper Motor (Inch)
Linear controller with Stepper Motor (Metric)
1