Handwheels, Leadscrews, and Leadscrew Drives
Simple slides and drives can be devised in your own shop using standard components available from Sherline Industrial Products. An accurately marked handwheel on a threaded rod of known pitch provides precise control over linear movement. These nicely machined and finished components will also add a professional look to your designs. Components for backlash adjustment are provided when ordered with a leadscrew. You can add automated control by using stepper motor-driven leadscrews.
-
Inch: 1/4-20 leadscrew, 50 divisions
-
Metric: 6.3 x 1 mm leadscrew, 100 divisions
1-5/8″ Handwheel with 11″ Leadscrew Assembly
2-1/2″ Handwheel with 11″ Leadscrew Assembly
2″ Zero Adjustable Handwheel with 11″ Leadscrew Assembly
2-1/2″ Zero Adjustable Handwheel with 11″ Leadscrew Assembly
Stepper motor driven 11″ Leasdscrew with Linear Controller
When paired with Sherline’s programmable linear controller, this setup provides a complete, self-contained single-axis CNC power feed. The power supply, mounting screws, and anti-backlash nut (not shown) are included. An additional cable is provided for use with a limit switch or for “daisy-chaining” multiple controllers.
Leadscrew & Handwheel Graduations
Controller Power Supply
The included power supply is compatible with 110–240 VAC and automatically switches between voltages for use in countries with 220–240V power. (The original version of this power supply was 110 VAC only.)