Rudy Kouhoupt is an experienced machinist and a long-time editor at Home Shop Machinist magazine. He has put together a complete set of video instructions that take you from start to finish in building a small steam engine. The VHS two-video set runs 3 hours and 38 minutes and offers a wealth of information on machining. You get a set of dimensioned plans that detail each individual part, plus you also get a bill of materials showing you which raw materials you will need to assemble before starting.
This is the perfect way to build your first steam engine. It's like having a machinist with thirty years of experience standing by your side while you turn the handles and crank out the parts. When you are done, you will not only have built your confidence level and gained a lot of valuable machining skills, you will also have a beautiful working steam engine for your office, den or coffee table.
Rudy has also written several books on machine shop practice. They are available through Home Shop Machinist magazine. You can find a link to the magazine on our "Resources" page.
Return to Lathe Accessories Section