Model 4000/4100 Lathe

Click on above photo for a larger image, or CLICK HERE for a slide show on the 4000-series lathes. (If you don't have Microsoft PowerPoint®, CLICK HERE to download a free viewer from Microsoft to view PowerPoint shows.)

Standard equipment for the basic model 4000 (metric 4100) lathe includes a powerful 90 VDC motor with electronic speed controller, a 2.75" (70mm) x 6.0" (152mm) crosslide, 15" (381mm) steel bed to allow 8" (203mm) between centers, standard 1-5/8" (41mm) laser engraved aluminum handwheels, pulleys, belt, faceplate, lathe dog, two dead centers, three hexagonal keys, tool post, sharpened high-speed steel cutting tool, eight-foot, three-wire power cord and instruction booklet. This lathe can turn a part up to 3.5” in diameter over the bed or up to 1.88” over the carriage without riser blocks. With an optional riser block, parts up to 6” in diameter can be turned over the bed. The lathe has 8” of space between centers. The electronic speed control allows continuously variable speed control from 70 to 2800 RPM without belt changes. There is a second pulley position available that offers extra torque at low RPM if needed.

This lathe is a good choice for clockmakers, modelers or those who will be working on small parts. It is also the most compact lathe we make and is easily used where space is at a premium and can be stored on a closet shelf.

OTHER OPTIONS: The 4000/4100 lathe can be ordered with P/N 8200 digital readout already installed on the crosslide and leadscrew axes. Standard handwheels are not included because they are replaced by the DRO handwheels. The lathe can also be ordered in "CNC ready" configuration ready for the application of stepper motors and CNC controls. In this configuration the standard handwheels are supplied so that they can be used on the rear shaft of a dual shaft stepper motor for optional manual control.

READ INSTRUCTIONS FOR SETTING UP A LATHE OR MILL

READ INSTRUCTIONS FOR USING A LATHE

Save money with package deals

Lathes can now be purchased packaged with chucks and other preselected groups of accessories. See the page on PACKAGE DEALS. Save time and money by buying a package.

RETURN TO LATHES PAGE

VIEW MILLS PAGE

RETURN TO SHERLINE'S HOME PAGE

| Home Page | About Sherline | Frequently Asked Questions | Testimonials | Lathes |
| Mills | Accessories | Dealers | Tool Prices | Accessory Prices |
| Contest | Full Size Tools | SHERLINE Weight Scales | Race Car Alignment System |
| IMMA | Resources | SHERLINE People |

Copyright 2000, Sherline Products Inc. All rights reserved.
No part of this web site, including the text, photos or illustrations, may be reproduced or transmitted in any other form or by any means (electronic, photocopying, recording or otherwise) for commercial use without the prior written permission of Sherline Products Inc.