Using a larger handwheel can give a tool a more substantial feel and make cranking easier. These large 2½” handwheels have the same number of graduated markings as the standard 1⅝” or 2″ handwheels but offer a “beefier” feel. They can be used on either the lathe or mill.
NOTE: The Oversize 2½” handwheel is not recommended for use on the lathe tailstock as it will interfere with the leadscrew handwheel if oversize handwheels are used on both.
When upgrading handwheels, consider also the zero adjustable handwheels. They are available in 2″ and 2½” diameters and can make keeping track of dimensions easier.
FIGURE 1: The engraved numbers on the handwheels are oriented differently for ease of reading depending on the axis onto which they are mounted. For example, if you mount a handwheel designed for the mill X-axis on the mill Y-axis, the numbers will appear upside down (handwheels shown in FIGURE 1 are not necessarily those that will ship with your order).
Download PDF 3400 Instructions
|34020||Oversize Handwheel Knob|
|34030||Oversize Handwheel Shaft|
|34070||2.5″ Handwheel Body, X/Z Axis (Metric P/N 34090)|
|34010||2.5″ Handwheel Body, Y Axis (Met. P/N 34110)|
|34080||2.5″ Handwheel Plug|
|40520||10-32 X 3/16 Cup Pt Set Screw|
The spindle handwheel was designed to make the task of controlling the spindle easier. With it, you can quickly stop the spindle or turn it by hand to tap a thread or inspect a part. The handwheel mounts on the … Continued