Lathe Vertical Milling Column – CNC Ready
With this attachment, the Sherline lathe can be quickly and easily converted into a small milling machine. The attachment consists of a steel dovetailed vertical column with a solid aluminum base that attaches to the bed of the lathe in place of the headstock. The headstock then mounts to a dovetailed saddle on the vertical column. The saddle is raised and lowered to control the depth of cut by turning a handwheel. Calibrations on the handwheel enable depth control to .001″ (.01mm). Parts to be machined are mounted on the crosslide. This CNC-ready version is fitted with a stepper motor mount and coupling ready for the installation of a NEMA 23 frame size stepper motor (not included). The mount includes two flanged ball bearings and a preload nut to eliminate end play. We recommend the use of a dual shaft motor so that the handwheel (included) can be used for manual control for positioning or when CNC control is not needed.
New Feature! Vertical milling columns now include an oil reservoir on the saddle nut to keep the leadscrew lubricated.
This is the most economical way to get into milling. Most standard vertical milling operations can be performed with this attachment, with size being the basic limitation. Conversion from the lathe to milling takes less than one minute. Almost all Sherline milling accessories may be used with the setup. At a later date, should you wish to upgrade to a complete vertical milling machine, the column will fit the 10″ XY-base or 12″ XY-base. This offers cost savings compared to purchasing a complete vertical milling machine because you save the cost of a second headstock, motor and speed control.
The model 4000 lathe is shown set up with a vertical milling column attachment. Convert from lathe to mill, or back to a lathe, in less than one minute!
Explanation of terms: As used in reference to the Sherline product line, a MILL COLUMN is a column used on a mill. It is held in place on the mill base with two 1/4-20 bolts. A VERTICAL MILLING COLUMN is used on the lathe to add a milling capability. It has a large hole in the center that fits over the headstock pin on the lathe base and is held in place with a set screw. The lathe’s headstock/motor/speed control unit is relocated from the pin on the base to the pin on the vertical milling column saddle. In practice, all vertical milling column bases now have both the single hole for the pin AND the two holes for use on a mill base, so they can be used for either application, whereas mill columns can only be used on a mill base.
NOTE: CNC-ready machines cannot be operated manually until stepper motors are installed.
Always wear safety glasses when operating machine tools.
|12050||8-32 x 3/8″ SHCS||3|
|34060||Thrust Bearing Set||1|
|2.5″ Z Axis Handwheel (Inch)
2.5″ Z Axis Handwheel (Metric)
|35160||Graduated Clamping Ring||1|
|35170||Movable Clamp Disk||1|
|40176||Saddle Travel Extension w/Screws||1|
|Z-Axis Backlash Adjustment Upgrade (Inch)
Z-Axis Backlash Adjustment Upgrade (Metric)
|40330||10-32 x 5/8″ SHCS||4|
|40340||10-32 x 1″ SHCS||1|
|40540||5/16-18 x 3/4″ Cone Point Set Screw||1|
|40600||10-32 x 1/4″ Flat Point Set Screw||1|
|40660||#10 Washer 3/16″||1|
|40670||10-32 x 1/2″ SHCS||4|
|40690||10-32 x 3/4″ SHCS||4|
|40740||10-32 x 7/8″ SHCS||1|
|40900||10-32 x 3/8″ Flat Head Screw||1|
|45200||Bored Column Thrust||1|
|50211||8-32 x 1/4″ Button Socket Screw||1|
|50220||1/4-20 x 1-3/4″ SHCS||2|
|56130||Arm Hold Down Bolt||1|
|56200||Arm Hold Down Washer||1|
|56210||3/8-16 x 2″ Should Bolt||1|
|56220||Swing Arm – Left Side||1|
|56230||3/8-16 Flange Nut||2|
|56330||Swing Arm – Right Side||1|
|56350||Column Adjustment Block||1|
|56400||Arm Spacer Block||1|
|56470||3/32″ x 1/2″ Dowel Pin||1|
|56670||Lathe Column Base||1|
|67021||CNC Mill Column Bed||1|
|Column Lead Screw (Inch)
Column Lead Screw (Metric)
|67102||Stepper Motor Mount||1|
|67104||CNC Preload Nut – Right Hand||1|
|67111||8-32 x 7/8″ SHCS||2|
|67115||5-40 x 7/8″ SHCS||1|
|67120||Stepper Motor Preload Bearing||2|
|76140||5/64″ Hex Key||1|
We do not charge a flat rate for shipping because of the variations in weight for our products. Instead we charge you what the shipping company charges us. Our website uses a shipping calculator based on the daily rates for USPS and UPS based on the weight and destination of the shipment. You can also have us use your UPS/FedEx account number to charge your shipping to. Just enter it in the appropriate box on the checkout page.
Domestic orders are shipped Monday – Friday. Expedited orders must be placed by 9 am PST to ship the same day.
Orders shipping ground have a processing time of 7 working days for domestic orders and 14 working days for international orders. Click here for more information on our shipping and order policies.
Most merchandise can be returned within 30 day of the purchase date. A refund will be issued to the original form of payment at the original selling price. View our complete return policy and/or start your return online here.