Our 4-jaw chucks are available in two different sizes, and in independent jaw or self-centering jaw configurations. The smaller 2.5″ 4-jaw independent chucks are availble with 3/4-16 threads for use on Sherline machines. Other spindle threads are available to fit chucks by other manufacturers, such as 12 mm x 1 mm and 14 mm x 1 mm for older Unimat lathes or 1/2-20 for old 6″ Sears lathes.
- They can be used to hold irregularly shaped parts
- They can be used to center parts with a great deal of accuracy
- 4-jaw chucks can be used to deliberately hold a part off-center
- They can clamp stock tighter
- For those who have jobs where speed and ease of use are more important than maximum accuracy and want a chuck that is loose right from the start (No extra charge). Add the note “loose jaws” to the comments box below
- Soft (not hardened or machined) steel jaws are also available when you build your own chuck.
- They can be used to hold irregularly shaped parts.
- They can be used to center parts with a great deal of accuracy.
- 4-jaw chucks can be used to deliberately hold a part off-center.
- They can clamp stock tighter.
- For those who have jobs where speed and ease of use are more important than maximum accuracy and want a chuck that is loose right from the start (No extra charge). Add the note “loose jaws” to the comments box below
- Soft (not hardened or machined) steel jaws are also available when you build your own chuck.
- They can be used to hold irregularly shaped parts.
- They can be used to center parts with a great deal of accuracy.
- 4-jaw chucks can be used to deliberately hold a part off-center.
- They can clamp stock tighter.
- For those who have jobs where speed and ease of use are more important than maximum accuracy and want a chuck that is loose right from the start (No extra charge). Add the note “loose jaws” to the comments box below
- Soft (not hardened or machined) steel jaws are also available when you build your own chuck.
Build Your Own Chuck
3-Jaw Self-Centering chucks 4-Jaw Self-Centering chucks 4-Jaw Independent chucks Various chuck jaws
Lead time for custom-built chucks is 4-5 business days.
2.5″ 4-Jaw Independent Chucks – Various Thread
Includes hex key, not pictured
These chucks have four advantages over 3-jaw chucks.
This is a valuable asset when machining cams, crankshafts, and similar parts. The main disadvantage of the 4-jaw independent chuck is that the jaws must be set individually, adding considerable setup time. The jaws are reversible to accommodate larger stock.
NOTE: The independent chucks don't have Tommy bar holes like the scroll chucks because most people use the 5/32" hex wrench into one of the jaw screws to thread the chuck on and off. Our P/N 3020 5/32" Hex T-Driver works perfectly.
Like the Sherline 3-jaw chucks, the 4-jaw chucks can clamp either externally or internally. Although we recommend the 3-jaw chuck for standard lathe projects, the 4-jaw chuck is considered the accessory that could add the most versatility to your machine. If you feel the 4-jaw chuck would be more useful, and you have no need for the 3-jaw chuck, any lathe “A” package can be ordered with the 4-jaw chuck substituted for the 3-jaw upon request. A clamping groove allows the chuck to hold parts for milling.
Chucks for Sherline and Other LathesThe chuck is available in several spindle threads for use on Sherline (3/4-16) and other machines, such as old Unimat lathes (12 mm x 1 mm and 14 mm x 1 mm) or Sears 6" lathes (1/2-20). *Please note that chucks with a thread size other than 3/4″ x 16 are made to order and have a lead time of 5-7 business days.
Jaw Options
3.1″ 4-Jaw Independent Chuck – 3/4-16 Thread
Includes hex key, not pictured
These chucks have four advantages over 3-jaw chucks.
This is a valuable asset when machining cams, crankshafts and similar parts. The main disadvantage of the 4-jaw independent chuck is that the jaws must be set individually, adding considerable setup time. The jaws are reversible to accommodate larger stock.
NOTE: The independent chucks don't have Tommy bar holes like the scroll chucks because most people use the 5/32" hex wrench into one of the jaw screws to thread the chuck on and off. Our P/N 3020 5/32" Hex T-Driver works perfectly.Like the Sherline 3-jaw chucks, the 4-jaw chucks can be used to clamp either externally or internally. Although we recommend the 3-jaw chuck for standard lathe projects, the 4-jaw chuck is considered the accessory that could add the most versatility to your machine. A clamping groove allows the chuck to hold parts for milling.
Jaw Options
3.1″ 4-Jaw Independent Chuck – ER-16 Thread
For use on the ER-16 headstock only Not for use on the standard headstock that comes on all Sherline Machines
Sherline offers their 3.1″ 4-jaw self-centering chucks with a 22 x 1.5 mm threaded hole for use on Sherline’s optional ER-16 spindle nose. They can also be used with certain other ER-16 spindles that use the 22 x 1.5mm thread for the collet nut.These chucks have four advantages over 3-jaw chucks.
This is a valuable asset when machining cams, crankshafts and similar parts. The main disadvantage of the 4-jaw independent chuck is that the jaws must be set individually, adding considerable setup time. The jaws are reversible to accommodate larger stock.
NOTE: The independent chucks don't have Tommy bar holes like the scroll chucks because most people use the 5/32" hex wrench into one of the jaw screws to thread the chuck on and off. Our P/N 3020 5/32" Hex T-Driver works perfectly.Like the Sherline 3-jaw chucks, the 4-jaw chucks can be used to clamp either externally or internally. Although we recommend the 3-jaw chuck for standard lathe projects, the 4-jaw chuck is considered the accessory that could add the most versatility to your machine. If you feel the 4-jaw chuck would be more useful, and you have no need for the 3-jaw chuck, any lathe “A” package can be ordered with the 4-jaw chuck substituted for the 3-jaw upon request. A clamping groove allows the chuck to hold parts for milling.
Jaw Options