| Part No. | Description | Quantity |
|---|---|---|
| 20750 | Jeweler DOP Holder Body | 1 |
| 40570 | 3/32″ Hex Key | 1 |
| 40580 | Tommy Bar | 1 |
| 40600 | 10-32 x 1/4″ Cup Point Set Screw | 1 |
| 56470 | 3/32″ x 1/2″ Dowel Pin | 1 |
Back to Tool Holders
Important Update Regarding Sherline Products
October 20, 2026
We would like to share an encouraging development regarding the future of Sherline Products.
We are currently in discussions with an American manufacturer regarding the potential purchase of Sherline’s intellectual property and remaining inventory. The goal of this proposed acquisition is to preserve and revitalize the Sherline brand while providing continued availability of replacement parts, accessories, and machines for our valued customers.
As these discussions progress, we have agreed to temporarily suspend accepting new orders, effective October 19, 2026. This will allow us to preserve our remaining inventory while negotiations are underway.
Although no final agreement has been reached, we are hopeful that this opportunity will provide a positive path forward for the Sherline name and the customers who have trusted our products for more than five decades.
We sincerely appreciate your patience, understanding, and continued loyalty during this transition. We will share additional information as soon as it becomes available.
Our greatest hope is that the Sherline legacy of quality, precision, and American craftsmanship will continue for generations to come.
Karl Rohlin III and Charla Papp
Co-Owners, Sherline Products, Inc.
October 20, 2026
We would like to share an encouraging development regarding the future of Sherline Products.
We are currently in discussions with an American manufacturer regarding the potential purchase of Sherline’s intellectual property and remaining inventory. The goal of this proposed acquisition is to preserve and revitalize the Sherline brand while providing continued availability of replacement parts, accessories, and machines for our valued customers.
As these discussions progress, we have agreed to temporarily suspend accepting new orders, effective October 19, 2026. This will allow us to preserve our remaining inventory while negotiations are underway.
Although no final agreement has been reached, we are hopeful that this opportunity will provide a positive path forward for the Sherline name and the customers who have trusted our products for more than five decades.
We sincerely appreciate your patience, understanding, and continued loyalty during this transition. We will share additional information as soon as it becomes available.
Our greatest hope is that the Sherline legacy of quality, precision, and American craftsmanship will continue for generations to come.
Karl Rohlin III and Charla Papp
Co-Owners, Sherline Products, Inc.
Jeweler DOP Holder, 3/32" Hex Key and spindle tommy bar
Holding a brass DOP (not sold by Sherline)
Holding a centering DOP (not sold by Sherline)
Image shown is a representation only. Actual product may vary.
Jeweler DOP Holder
Sherline Products, in collaboration with Bryan D. Drummond (Gem Cutter & Goldsmith), has designed this DOP Holder specifically for securely holding lapidary DOP sticks during gemstone cutting. If you already own one of our machines, the holder is designed to thread directly onto our ¾-16 headstock spindle nose. It will also be an essential accessory for our upcoming gem cutting machines.
Compatible with Ultra Tec® Dops
This DOP Holder has been precisely engineered with tolerances and a keyed dop system designed for compatibility with Ultra Tec® brand dops which are used on their faceting machines. Many gem cutters use Ultra Tec equipment for flat faceting, and the keyed dop feature provides secure alignment and ease of use, making it a valuable addition to your setup.
Sherline does not manufacture dops, but they can be purchased directly from Ultra Tec. Like Sherline, Ultra Tec products are high-quality and Made in the USA.
Features:
- Made from 12L14 steel with electroless nickel plating for corrosion resistance
- Tapered body provides greater visual access to the stone during cutting
- ¼” dop hole with 10-32 set screw to secure the dop
- 3/32″ locating pin for alignment of angle-cut dops
- Precision-machined with tight tolerances for a secure, accurate fit
- Keyed dop system ensures repeatable orientation and alignment
- Fully compatible with Ultra Tec® brand dops and machines
- High-quality construction – Made in the USA
Related products
-
P/N 2078 holds jeweler’s burrs with a 3/32" shank.
-
P/N 2079 is designed for Dremel® tools and other cutters with a 1/8" shank.
- P/N 2080 holds jeweler’s burrs with a 3mm shank.
Sale!
Price range: $26.23 through $31.35
Read more
Jeweler Burr Holder
These specialized holders were developed at the request of a jewelry design customer. Similar to our standard end mill holders, they feature a longer body with a tapered end, allowing better visibility of the cutter and improved access for working in cavities.
Each holder includes two Tommy bars and one 1/16" hex key.