Back to Tool Holders
About the Jeweler Burr Holders
The Jeweler Burr Holders were requested by one of our jewelry design customers. The holders are similar to our standard end mill holders. They are longer with a tapered end so you can see the cutter and also be able to cut down into cavities.
Two Sizes to Choose
P/N 2078 is designed to hold a Jeweler burr that has a 3/32″ diameter shank.
P/N 2079 is designed for Dremel tools and other cutters that have a 1/8″ diameter shank.
Each assembly comes with (2) Tommy bars and (1) 1/16″ Hex key.
|20780||3/32″ Jeweler Burr Holder Body (P/N 2078 only)||1|
|20790||1/8″ Jeweler Burr Holder Body (P/N 2079 only)||1|
|20791||5-40 x 3/16″ Cup Point Set Screw||2|
|20792||1/16″ Hex Key||1|