A milling vise is the first accessory most mill owners purchase. It will handle a large percentage of the part-holding duties when milling and is easy to use. (Click on photo for larger image.)
| P/N | NAME | WT. | PRICE |
| 3551 | Milling Vise | 2.5 lb. | $75.00 |
The most convenient way to hold small parts for milling is with the milling vise. Milling vises are different from other machine vises in that they are designed to hold the movable jaw down while clamping, eliminating any chance for the jaw to lift. It is also accurately made. A cheap drill press vise is almost useless on a milling machine, because it can’t be accurately aligned to the machine.
A ghost view of the mill vise shows the brass pull-down barrel in yellow.
The Sherline milling vise is sized just right to be the perfect working companion to the Sherline milling machine. The jaws are 2.00" (50.8mm) wide by 1.00" (25.4mm) deep and open a full 2.00" (50.8mm). The fixed jaw has both a horizontal and vertical "V" groove to facilitate holding round bar stock. The vise includes two clamps for use in attaching it to the milling machine. These clamps are the same as the 4-jaw hold-down set (P/N 3058).
READ INSTRUCTIONS FOR USING THE MILLING VISE (Click on your choice.)
.html Version (Web site version)
.pdf Version (The same as our printed instructions. Requires Adobe Acrobat program to view.)
RETURN TO ACCESSORIES MASTER LIST
Shop for Sherline LATHES
Shop for Sherline MILLING MACHINES
Shop for Sherline CHUCKS
RETURN TO SHERLINE'S HOME PAGE
| Home
Page | About
Sherline | Frequently
Asked Questions | Testimonials
| Lathes
|
| Mills
| Accessories
| Dealers
| Tool
Prices | Accessory
Prices |
| Contest
| Full
Size Tools | SHERLINE
Weight Scales | Race
Car Alignment System |
| IMMA
| Resources
| SHERLINE
People |