Adapters are available to hold Sherline chucks (3/4-16 thread) and Jacobs drill chucks (3/8-24 thread) on non-Sherline lathes. The ends are made to fit watchmaker's lathes that take 8.0 mm or 10.0mm "D" collets. Left to right are P/N 2090, 2091, 2092 and 2093. (Click on photo for larger image.)
| P/N | NAME | WT. | PRICE |
| 2090 | 8.0 mm Collet to 3/4-16 Adapter | .5 lb. | $40.00 |
| 2091 | 10.0 mm "D" Collet to 3/4-16 Adapter | .5 lb. | $45.00 |
| 2092 | 8.0 mm collet to 3/8-24 Adapter | .5 lb. | $40.00 |
| 2093 | 10 mm "D" Collet to 3/8-24 Adapter | .5 lb. | $45.00 |
These arbors are not designed to be used on Sherline lathes, but rather are specifically suited to the types of lathes often used by jewelers and watchmakers. Though highly accurate, these machines are often not very versatile.
The 3/4"-16 Arbors provide a way to mount a Sherline 3-jaw or 4-jaw chuck to this type of lathe. The 3/8"-24 arbors allow a 1/4" or 3/8" Drill Chuck to be mounted. The ability to mount these chucks adds a great deal of versatility to this type of special purpose tool.
READ INSTRUCTIONS FOR USING COLLET-TO-THREAD ADAPTERS (Click on your choice.)
.html Version (Web site version)
.pdf Version (The same as our printed instructions. Requires Adobe Acrobat program to view.)
RETURN TO ACCESSORIES MASTER LIST
Shop for Sherline LATHES
Shop for Sherline MILLING MACHINES
Shop for Sherline CHUCKS
RETURN TO SHERLINE'S HOME PAGE
| Home
Page | About
Sherline | Frequently
Asked Questions | Testimonials
| Lathes
|
| Mills
| Accessories
| Dealers
| Tool
Prices | Accessory
Prices |
| Contest
| Full
Size Tools | SHERLINE
Weight Scales | Race
Car Alignment System |
| IMMA
| Resources
| SHERLINE
People |
