Instructional Videos – Sherline Products

Sherline Instructional Videos

Welcome to the Instructional-Video section of the Sherline Products website. Here, you can view videos of How-to Instructions that detail assembly, installation, upgrading, repair, and operation of Sherline machines and accessories.

Lathe

Assembly/Installation Videos

Setting up a Sherline Lathe

Motor and Speed Control Assembly

Gib Installation and Setup

Eliminating Tool Chatter

Backlash and Gib Adjustment on Lathe Saddle

Adjusting Backlash on Sherline Lathes and Mills

DRO Handwheel Installation

Maintaining Your Laser Engraving XY Base

Removing Stepper Motors

Installing Stepper Motors

Assembling Your Ball Screw Lathe

Adjusting the Gibs on the Ball Screw Lathe

Adjusting the Chucker Lathe Headstock Height

Mill

Assembly/Installation Videos

X/Y-Axis Ball Screw Retrofit

Z-Axis Ball Screw Column Retrofit

Ball Screw X/Y Saddle Lubrication Update

Aligning the Ball Nut to the Stepper Motor

Accordion Way Cover Installation

Installing the Way Cover Upgrade with Guide Rods

Aligning the Stepper Motor to the Ball Screw

Upgrading to a 15-inch Column Bed

Removing the Ball Screws for Replacement

Installing Upgraded Ball Screws

Removing and Adjusting Machine Handwheels

Truing the Spindle Shoulder Face on a Mill

Replace, Assemble, and Adjust the X/Y-axes Mill Backlash

Using the Sherline MB Vise Fixture video-Part 1

Using the Sherline MB Vise Fixture video-Part 2

Installing Brass Tube Covers on Ball Screw Machines

Squaring up and Indicating in a Mill

Accessory How-To Videos

Centering an Independent 4-Jaw Chuck

Pie Jaw Demonstration

Using the Radius Cutting Attachment (P/N 2200)

Assembling the Thread Cutting Attachment

Using the Threading Cutting Attachment

Cutting Threads with the Compound Slide

Using the Leadscrew Engagement Lever with DRO

3-Jaw Chuck Jaw Installation and Care

Replacing the Speed Control Toggle Switch

Using the Bump Knurl Tool

Tailstock Adjustment and Removal

Setting the Headstock Bearing Preload