| SIZE | 5/32″ |
| NO. OF FLUTES | 2 |
| LENGTH OF CUT | 7/16″ |
| SHANK DIAMETER | 3/8″ |
| TOOL MATERIAL | High Speed Steel |
| FINISH COATING | Bright Finish |
| CENTER CUTTING | Yes |
| SINGLE OR DOUBLE END | Double |
| OVERALL LENGTH | 3-1/8″ |
| CUTTING DIRECTION | Right Hand |
| FLUTE SHAPE | Spiral Flute |
| FLUTE LENGTH | 7/16″ |
| HARDNESS | 58 to 60 RC |
5/32″ Double End Mill (2-Flute)
5/32″ mill diameter, 7/16″ cut, 3-1/8″ length
-
Related products
Right Hand HSS Tool
Lathe tools—often referred to as tool bits—are the primary cutting tools used for turning and facing operations on a lathe. The most common type is made from high-speed steel (HSS), which is suitable for machining a wide range of materials, including wood, plastic, aluminum, brass, and steel. HSS tool blanks are relatively inexpensive and can maintain their hardness at temperatures up to 1000°F (588°C), making proper control of depth of cut, cutting speed, and feed rate essential.
A major advantage of HSS tools is how easily they can be sharpened. They can be shaped and resharpened using a standard aluminum oxide grinding wheel and, once sharpened, will hold their edge for a long time.
NOTE: A lathe tool is named for the direction the chip exits the tool. A right-hand tool has its cutting edge on the left, causing the chip to peel off to the right.
80° Carbide Insert
While carbide inserts may have a higher upfront cost, they offer excellent value by providing four usable cutting edges per insert and significantly reducing time spent on tool sharpening.
Carbide cutters excel at machining difficult materials such as cold-rolled steel, stainless steel, and bronze, delivering consistent performance and long tool life. They are also compatible with aluminum, brass, and leaded steels—though for these softer materials, a finely honed high-speed steel tool may still yield the best surface finish.
This is the 10-pack of replacement carbide inserts for the following tool holders:
Right Hand Carbide Tool
About 1/4″ Brazed Tip Carbide Tools Carbide tools have a small piece of tough carbide brazed to the tip of a softer steel shank. These tools are recommended for cutting hard or abrasive materials. Carbide tools can retain their hardness … Continued
