10-32 T-Nuts


Clear selection
    Reset options

Product Description

These T-nuts are sized to fit in the T-slots of the Sherline lathe crosslide, the mill table, the rotary table, and other accessories that have T-slots, like the 90° angle plate. They are tapped to accept 10-32 screws. They are not just square nuts but have an extended shank that fits into the table slot to maximize thread engagement of your hold-down screws.

NOTE: The top of the T-nut will protrude above the top of the crosslide on the lathe by .050″ – .060″ (1.27 – 1.54 mm). It will protrude above the top of the mill table on the mill and chucker lathe by .030″ – .040″ (.76 – 1.1 mm).

All Sherline accessories that require T-nuts come with the proper number, but because of their small size, they are easily misplaced. Extra T-nuts are always handy to have around. Even those machinists that prefer to make their own accessories for their tools don’t bother to make their own T-nuts.