(Metric version part number given in parenthesis after inch part number)
(Left) P/N 5201, (L. Center) P/N 5230, (R. Center) P/n 5420, (Right) P/N 5625. (Click on photos for larger images.)
CNC-ready XYZ bases: (L) 5201-CNC with 10" base, (M) 5420-CNC with 12" base and (R) 5625-CNC with 14" base and 8-direction column. CNC ready bases come with 1-5/8" handwheels for use on the rear shaft of the stepper motors. (NOTE: Handwheels cannot be attached and the machine used manually until stepper motors with a dual shaft are installed.) (Click on photos for larger images.)
Inch part numbers are listed first, followed by the metric version in parenthesis.
| P/N | NAME | WT. | PRICE |
| 5201 (5211) | Mill XYZ base (10" 5000-series) | 26 lb | $410.00 |
| 5201-CNC (5211-CNC) | CNC-ready Mill XYZ base (10" 5000 series) | 27 lb | 660.00 |
| 5230 (5235) |
Mill XYZ base (5000-series w/ adjustable handwheels) |
26 lb | 465.00 |
| 5420 (5430) |
Deluxe Mill XYZ base (5400- series) |
27 lb | 496.00 |
| 5420-CNC (5430-CNC) | CNC-ready Mill XYZ base (12" 5400-series) | 28 lb | 700.00 |
| 5625 (5630) | 14" Base from 2000-series 8-direction mill | 34 lb. | 775.00 |
| 5625-CNC (5630-CNC) | CNC-ready Mill XYZ base (14" 2000-series) | 35 lb | 890.00 |
The Sherline vertical mill can be purchased without the headstock and motor/speed control. This allows lathe owners to swap the headstock and motor/speed control from their lathe to the mill in approximately 60 seconds. This package offers a savings of about 28-30% when compared to the price of our standard mill.
Part numbers and travels of the available XYZ bases are as follows:
P/N 5201 (Inch) or 5211-CNC (Metric)—Standard 10" XYZ base from model 5000/5100 mill. Travel: X=9.0" (228mm), Y= 3.0" (76mm), Z=6.25" (159mm)
P/N 5230 (Inch) or 5235 (Metric)—Standard 10" XYZ base from model 5500/5510 mill with adjustable "zero" handwheels (Same travels as 5201 above)
P/N 5420 (Inch) or 5430 (Metric)—12" deluxe XYZ base with adjustable "zero¨ handwheels and laser engraved table and base from model 5400/5410 deluxe mill. Travel: X=9.0" (228mm), Y= 5.0" (127mm), Z=6.25" (159mm)
P/N 5625 (Inch) or 5630 (Metric)—14" XYZ base with 8-direction capability from the model 2000/2010 8-direction mill. Travel: X=9.0" (228mm), Y=7.0" (178mm), Z=5.38" (137mm)
Any Sherline mill XYZ base can be ordered with stepper motor mounts installed on the X-, Y- and Z-axes ready for the installation of NEMA 23 size stepper motors. (Stepper motors not included, see the STEPPER MOTOR page.) Included with the CNC-ready XYZ bases are three low mass 1-5/8" handwheels. If using Sherline or other dual shaft stepper motors, the handwheels can be mounted to the rear shaft to provide manual control in addition to CNC control. (NOTE: Manual control is not possible on CNC-ready bases until a dual shaft stepper motor has been installed. Handwheels cannot be installed directly onto the stepper motor mounts.) These slides have been popular items in industry to control movement in small production line processes, and the addition of computer control extends the possibilities for automation. Travels of each of these CNC-ready bases are the same as for the manually controlled versions shown above.
READ INSTRUCTIONS FOR SETTING UP AND USING A MILLING MACHINE:
.html Version only
RETURN TO ACCESSORIES MASTER LIST
Shop for Sherline LATHES
Shop for Sherline MILLING MACHINES
Shop for Sherline CHUCKS
RETURN TO SHERLINE'S HOME PAGE
| Home
Page | About
Sherline | Frequently
Asked Questions | Testimonials
| Lathes
|
| Mills
| Accessories
| Dealers
| Tool
Prices | Accessory
Prices |
| Contest
| Full
Size Tools | SHERLINE
Weight Scales |
| IMMA
| Resources
| SHERLINE
People |