(Click on photo for larger image.)
| P/N | NAME | WT. | PRICE |
| 3017 | Crosslide Accessory Plate | 1 lb. | $40.00 |
The table on the mill is thicker than the table on the lathe because of the greater forces transferred to the table in milling and the requirement for stiffer setups. When using the vertical milling column on the lathe, the table can be "beefed up" with the addition of this plate, which adds 1/2" of thickness to the table. It also serves as a tooling plate that protects the surface of your lathe table from damage. The plate attaches to the table by means of four recessed cap screws and T-nuts. It should be removed for lathe turning to maximize the diameter of part that can be turned and so that the standard tool post can be used.
SPECIFICATIONS: Plate size: 2.75" x 6" x 0.5". T-slots: 1.5" on centers. Mounting holes on center with T-slots, first set: 0.5" in from end, other set 3.5" on center from first set.
READ INSTRUCTIONS FOR USING THE CROSSLIDE ACCESSORY PLATE (Click on your choice.)
.html Version only (Web site version)
RETURN TO ACCESSORIES MASTER LIST
Shop for Sherline LATHES
Shop for Sherline MILLING MACHINES
Shop for Sherline CHUCKS
RETURN TO SHERLINE'S HOME PAGE
| Home
Page | About
Sherline | Frequently
Asked Questions | Testimonials
| Lathes
|
| Mills
| Accessories
| Dealers
| Tool
Prices | Accessory
Prices |
| Contest
| Full
Size Tools | SHERLINE
Weight Scales | Race
Car Alignment System |
| IMMA
| Resources
| SHERLINE
People |