Radius Cutting Attachment, P/N 2200

(Click on photo for larger image.)

P/N NAME WT. PRICE
2200 Radius Cutting Attachment 1 lb. $120.00

About the Radius Cutting Attachment...

The radius cutting attachment swings a tool through an arc to put a radius on the end of a part. The pivot points and tool position are adjustable, so it is capable of cutting either a concave or convex shape in a large range of sizes.

This tool came about as a result of studying the method used to shape grinding wheels. Conventional thinking says that lathe tools should move parallel to the tool’s longitudinal axis or horizontally across it. Once it was realized that the tool could also be pivoted vertically on this axis, the design of this tool became much easier to conceive. Believe it or not, a technician with a need to cut an accurate radius to make prosthetic eyeballs got us started on putting this tool into production. Now anyone with a need to put a nice looking radius on the end of a part can benefit from the way this accessory makes it easy. It may not be something that a lot of people need, but it is typical of our commitment to serve all of our customers. If you need to (or just think it would be fun to) put a radius onto or into the end of a part, this accessory makes it easy and repeatable. It can also cut a complete ball in a two-step operation covered in the instructions.

Note that the width of this attachment requires that your Sherline lathe have a 6" crosslide table. Older lathes that have the 4" table will not be wide enough. You can upgrade your lathe to the 6" table by ordering the following parts and changing tables. P/N 44880 crosslide table, P/N 44210 (inch) or P/N 44220 (metric) leadscrew. All other parts transfer from your old table. Changing tables is very easy.

The radius cutting tool attaches to the crosslide table and is pivoted up and down instead of moved side-to-side as is traditional for cutting on a lathe. It makes what could otherwise be a difficult task easy.

READ INSTRUCTIONS FOR USING THE RADIUS CUTTING ATTACHMENT (Click on your choice.)

.html Version (Web site version)

.pdf Version (The same as our printed instructions. Requires Adobe Acrobat program to view.)


RETURN TO ACCESSORIES MASTER LIST

Shop for Sherline LATHES

Shop for Sherline MILLING MACHINES

Shop for Sherline CHUCKS

RETURN TO SHERLINE'S HOME PAGE


| Home Page | About Sherline | Frequently Asked Questions | Testimonials | Lathes |
| Mills | Accessories | Dealers | Tool Prices | Accessory Prices |
| Contest | Full Size Tools | SHERLINE Weight Scales | Race Car Alignment System |
| IMMA | Resources | SHERLINE People |

Copyright 2000, Sherline Products Inc. All rights reserved.
No part of this web site, including the text, photos or illustrations, may be reproduced or transmitted in any other form or by any means (electronic, photocopying, recording or otherwise) for commercial use without the prior written permission of Sherline Products Inc.