| SIZE | 1/4″ |
| NO. OF FLUTES | 3 |
| SHANK DIAMETER | 1/4″ |
| TOOL MATERIAL | High Speed Steel |
| FINISH COATING | Uncoated |
| CENTER CUTTING | Yes |
| SINGLE OR DOUBLE END | Single |
| OVERALL LENGTH | 1-13/32″ |
| APPLICATION | Ideal for CNC and conventional milling. Excellent for slot step and face milling. |
| CUTTING DIRECTION | Right Hand |
| END TYPE | Single End |
| FLUTE SHAPE | 3 Flute |
| FLUTE LENGTH | 3/8″ |
| HARDNESS | 58 to 60 RC |
Back to Short - 3-flute, 1/4" Shank
1/4″ Short End Mill
1/4″ mill diameter, 3/8″ cut, 1-13/32″ length
-
Related products
1/4″ 3-Flute End Mill Set
1/4" Shank 3-piece, 3-flute End Mill Set (1/8", 3/16", 1/4")
Slitting Saws
Each saw blade is 2" in diameter with a 1/2" hole. The saw blades come in varying thicknesses and teeth counts. They require the slitting saw holder, which is held in the spindle with a drawbolt that pulls the holder up into the Morse #1 taper.
Note: Due to supply chain issues, the outside diameter of some of our saw blades may be 2-1/2" instead of 2" and teeth counts can vary. If you need a specific number of teeth in a certain size, please contact us to see if we have them in stock
80° Carbide Insert
While carbide inserts may have a higher upfront cost, they offer excellent value by providing four usable cutting edges per insert and significantly reducing time spent on tool sharpening.
Carbide cutters excel at machining difficult materials such as cold-rolled steel, stainless steel, and bronze, delivering consistent performance and long tool life. They are also compatible with aluminum, brass, and leaded steels—though for these softer materials, a finely honed high-speed steel tool may still yield the best surface finish.
This is the 10-pack of replacement carbide inserts for the following tool holders: