|
|
Always wear safety glasses when operating machine tools. |
|
Download PDF Carbide Tip Tools Instructions
|
Back to Inserts & Holders
55° Carbide Insert
While not inexpensive, carbide inserts offer excellent value—each insert provides four cutting edges, significantly reducing the need for frequent sharpening and saving valuable time.
Carbide cutters perform well on hard-to-machine materials like cold-rolled steel and are also effective on aluminum, brass, and leaded steels, offering exceptional durability. However, for the finest finishes on softer metals, a well-sharpened high-speed steel tool still delivers superior results.
This is the 10-pack of replacement carbide inserts for the following tool holders:
- Straight Insert Tool Holder
- 55° Carbide Tool Holders
- 55° RH Boring Bar
- 55° LH Boring Bar
- 55° RH 3/8″ Boring Bar w/2 Flats
- 55° LH 3/8″ Boring Bar w/2 Flats
- Quick-Change Carbide Insert Tool Holder
-
Related products
Carbide Inserts (thread, groove)
These Carbide inserts are used in the Insert Tool Holder and are used for either threading or grooving.
Thread Cutting
- 60° threading insert for cutting outside threads (P/N 22675)
- .031" insert (P/N 2269)
- .062" insert (P/N 2270)
- .094" insert (P/N 22694)
- .125" insert (P/N 22695)
- .031" radius insert (P/N 22692)
- .062" radius insert (P/N 22693)
Slitting Saws
Each saw blade is 2" in diameter with a 1/2" hole. The saw blades come in varying thicknesses and teeth counts. They require the slitting saw holder, which is held in the spindle with a drawbolt that pulls the holder up into the Morse #1 taper.
Note: Due to supply chain issues, the outside diameter of some of our saw blades may be 2-1/2" instead of 2" and teeth counts can vary. If you need a specific number of teeth in a certain size, please contact us to see if we have them in stock
