All materials tend to deflect away from the cutting tool when you are turning them on a lathe. This tendency is especially noticeable on long, slender parts and long pieces of bar stock, which makes it quite difficult to hold close tolerances. The best way to support a long section is with a center-mounted in the tailstock. However, for one reason or another, this is not always possible. As an example, it may be a piece of stock that you want to center drill so that you can mount it between centers, or it may be a part where a center drill hole would ruin the looks of the piece. Whatever the reason, a steady rest provides a means of supporting the piece while it turns.
The Sherline steady rest has three adjustable brass blades mounted in a holder that mounts on the bed of the lathe. These blades can be adjusted to the diameter of the part to provide the necessary support. Another advantage of the steady rest that is often overlooked is the fact that work held in position by the rest turns concentrically with its outside diameter. This means that concentricity is assured when working near the steady rest, because, at that point, it must be running perfectly true despite imperfections in how it is chucked or centered at either end. The Sherline steady rest will accommodate any size part, up to 1.75″ (44mm) in diameter.
To drill a hole at the end of a long shaft, use a center drill in the drill chuck mounted on the lathe tailstock. The steady rest keeps the shaft from wobbling and assures that the hole will be concentric with the outside diameter of the stock.
NOTE: A steady rest riser block is now available, which makes it possible to use the steady rest on the lathe with the headstock and tailstock riser blocks in place.
Always wear safety glasses when operating machine tools.
NOTE: Tighten the steady rest bed clamp (P/N 11760) to snug using the 10-32 x 3/4″ socket head cap screw (P/N 40690). Average clamping pressure should be enough to lock the steady rest to the lathe bed.
|Body Material||Zinc Casting|
|Body Coating||Black Paint|
|Body Dimensions (W X H)||3.25″ x 4″|
|Support Pad Material||Brass|
|11740||3 Brass Pads (see 11741 for single brass pad)||1|
|11750||Steady Rest Body||1|
|11760||Steady Rest Clamp||1|
|40510||10-32 x 3/8″ SHCS||3|
|40660||#10 Washer 3/16||4|
|40690||10-32 x 3/8″ SHCS||1|
We do not charge a flat rate for shipping because of the variations in weight for our products. Instead, we charge you what the shipping company charges us. Our website uses a shipping calculator based on the daily rates for USPS and UPS based on the weight and destination of the shipment. You can also have us use your UPS/FedEx account number to charge your shipping. Just enter it in the appropriate box on the checkout page.
Domestic orders are shipped Monday – Friday. Expedited orders must be placed by 9 am PST to ship the same day.
Orders shipping ground have a processing time of 7 working days for domestic orders and 14 working days for international orders. CLICK HERE for more information on our shipping and order policies.
Most merchandise can be returned within 30 days of the purchase date. A refund will be issued to the original form of payment at the original selling price. View our complete return policy and/or start your return online here.
The MASSO G3 CNC controller, power supply, stepper motors, cable system and optical encoder are sold as a part of our Accu-Pro line of machines and are not available for purchase separately or as an upgrade option to existing machines.
3/8″ Drill Chuck with two Arbors
This chuck includes a #0 Morse arbor for use in the tailstock for center drilling and a #1 Morse arbor for use in the headstock. It will hold drills from 3/32″ (2.4 mm) to 3/8″ (9.5 mm) in diameter. Runout … Continued