The Sherline industrial 2-axis slide was developed from components of the X/Y base of the Sherline miniature milling machine. The movements are designated as the X-axis and the Y-axis like a milling machine. The Y-axis moves the table in and out. The X-axis moves the table from side to side. If the table is mounted vertically, the side-to-side travel is still called the X-axis, but the vertical travel would then be called the Z-axis.
- The slides are manufactured from 6061-T6 aluminum and finished with a black anodized coating.
- The 2-axis CNC-ready machine slides are available with table lengths of 13″ or 18″, and any table is available with either an inch or metric leadscrew.
- Leadscrews are precision rolled from steel, and table screws are located under the table, out of the way of chips. Leadscrew backlash is adjustable.
- Dovetailed tables and saddles have adjustable gibs to eliminate play.
- 1-5/8″ handwheels are graduated in .001″ increments on inch slides and in .01 mm increments on metric slides.
- Stepper motor mounts for NEMA 23 stepper motors
NOTE: CNC-ready slides cannot be operated manually until stepper motors are installed.
FROM THE BOTTOM—Four 1/4-20 holes are provided in the base’s bottom on 2-inch centers for mounting.
FROM THE TOP—If access is not available from the bottom, the slide can be mounted from the top using the four angle clamps provided. They slide into the groove around the perimeter of the base, and holes are drilled in the mounting surface and tapped to accept the 10-32 socket head cap screws provided. Use all four clamps for the most secure mount.
Our slides’ weight capacity is about 10 lbs. depending on where the weight is located and how long the table is. On an 18″ table, you should not go more than 10 lbs. of weight at the end of the table (there is a leverage factor). If the weight is more centrally located (closer to the base), you can exceed the 10 lbs. limit.
Under heavy constant use, the dovetail area of the slide will start to show some wear on the anodize after one year (2080 hours). They are still fully functional at this point, but the anodized coating will begin to wear thin. The dovetail and the screw will last longer if you keep them lubricated with light oil*.
The leadscrews have a rolled thread which is hardened a bit by the rolling process. The backlash nuts are brass. The nut is the softer material, and therefore it is the part that wears out. The backlash nut is adjustable, so it can compensate for the wear until the threads are gone. You should get the same duty cycle (2080 hours) from the backlash nut before it will need to be adjusted or replaced.
*NOTE: Do not use WD40 as a lubricant on these slides. WD40 will remove the anodized coating from these parts!
Always wear safety glasses when operating machine tools.
|6545 (6546) 13″ table||6545-18 (6546-18) 18″ table|
|Table size||13″ x 2.75″ (330 mm x 70 mm)||18″ x 2.75″ (458 mm x 70 mm)|
|Table height||2.8″ (71.1 mm)||2.8″ (71.1 mm)|
|X-axis travel||9.0″ (228 mm)||13.38″ (340 mm)|
|Y-axis travel||4.1″ (104 mm)||4.1″ (104 mm)|
|Hold-down provision||2 T-slots*||2 T-slots*|
|Mounting provision||4 holes 1/4-20 in the bottom of the base plus slot for angle clamps||4 holes 1/4-20 in the bottom of the base plus slot for angle clamps|
|Handwheel||1-5/8″ laser engraved aluminum with two pre-loaded ball bearings||1-5/8″ laser engraved aluminum with two pre-loaded ball bearings|
* NOTE: Sherline 10-32 T-nuts that fit the table T-slots are available in a package of 10 as P/N 3056.
|12050||8-32 X 3/8″ Socket Head Cap Screw (+ 2 zip ties)||6|
|40280||Thrust collar (18″ table only)||1|
|40510||10-32 x 3/8″ Socket Head Cap Screw||2|
|40520||10-32 x 3/16″ Cup Point Set Screw||6|
|40530||5-40 X 3/8″ Socket Head Cap Screw (18″ table only)||1|
|40550||5/32″ hex key||1|
|40570||3/32″ hex key||1|
|40600||10-32 X 1/4″ Flat Point Set Screw||2|
|40690||10-32 x 3/4″ Socket Head Cap Screw||1|
|40890 (41890 Metric)||X-axis Slide Screw Nut||1|
|50130 (51130 Metric)||X-axis Anti-backlash Nut||1|
|50140 (51140 Metric)||Y-axis Anti-backlash Nut||1|
|50150||Backlash Lock Star Gear||2|
|50161 (51161 Metric)||Y-axis Leadscrew||1|
|50171 (51171 Metric)||13″ X-axis Leadscrew (P/N 6545/6546)||1|
|50173 (51173 Metric)||18″ X-axis Leadscrew (P/N 6545-18/6546-18)||1|
|50200 (51200 Metric)||Y-axis Slide Screw Nut||1|
|50211||Button Head Socket Screw||2|
|50920||Mill Saddle Oiler Body||1|
|50930||Mill Saddle Oiler Cap||1|
|54182||18″ Mill Table (P/N 6545-18/6546-18)||1|
|54183||18″ Table Leadscrew Bushing (P/N 6545-18/6546-18)||1|
|65401||Industrial X/Y Base||1|
|67102||Stepper Motor Mounts||2|
|67050||13″ Mill Table (P/N 6545/6546)||1|
|67106 (67108 Metric)||X-axis Preload Nut (Rh)||1|
|67107 (67109 Metric)||Y-axis Preload Nut (RH)||1|
|67111||8-32 X 3/4″ Socket Head Cap Screw||4|
|67115||5-40 x 7/8″ Socket Head Cap Screw||2|
|67120||CNC Preload Bearing||4|
Click the P/Ns below to download a zipped version of the IGS 3D CAD file. You will need to extract the zip file before viewing the IGS file.
13″ 6545/6546 CNC-Ready 2-Axis Slide 3D IGS model
18″ 6545-18/6546-18 CNC-Ready 2-Axis Slide 3D IGS model
You need an IGS viewer to view .igs files. CLICK HERE to download a FREE IGS viewer.
We do not charge a flat rate for shipping because of the variations in weight for our products. Instead, we charge you what the shipping company charges us. Our website uses a shipping calculator based on the daily rates for USPS and UPS based on the weight and destination of the shipment. You can also have us use your UPS/FedEx account number to charge your shipping. Just enter it in the appropriate box on the checkout page.
Domestic orders are shipped Monday – Friday. Expedited orders must be placed by 9 am PST to ship the same day.
Orders shipping ground have a processing time of 7 working days for domestic orders and 14 working days for international orders. CLICK HERE for more information on our shipping and order policies.
Most merchandise can be returned within 30 days of the purchase date. A refund will be issued to the original form of payment at the original selling price. View our complete return policy and/or start your return online here.