- Table size: 2.75″ x 8″ (70 mm x 203 mm)
- Table travel: 4.25″ (107 mm)*
- Hold-down provision: 2 T-slots
- Mounting provision: 2 holes 1/4-20 in the bottom of the base (Also available with through holes and T-nuts for mounting to slide table T-slots as Sherline accessory.)
- Handwheel: 2″ laser engraved aluminum with two pre-loaded ball bearings
*NOTE: The base must be mounted to overhang what it is mounted to for full travel to be achieved. On a flat plate mount, the vertical travel will only be about 0.5″ to 1″.
The bottom side mounting holes are 2″ on centers and a 1/2″ from the back side.
Always wear safety glasses when operating machine tools.