Back to XY Bases

18″ NexGen Benchtop Mill XY Base

-

Clear selection
    Reset options
SKU: N/A Categories: , Tag:

Product Description

Purpose of the Sherline Benchtop Mill XY Bases

Each of our four mill sizes is available as an XY base. You can purchase the base of any of our vertical mills as an XY base if you already own a vertical milling column for use with your lathe. The XY base offers a sturdier base and a larger work area than the lathe. Lathe owners can then swap the headstock and motor/speed control from their lathe to the vertical milling column in approximately 60 seconds.

XY bases have also found their way into the industrial market and are used in various manufacturing setups.

If You Have a Standard Mill Column Base

Please note that milling column bases made before 1995 must be modified in order to work with this XY base. You can return your older vertical milling column to the factory to be re-machined and used with an XY base rather than purchasing the entire vertical milling machine (Contact us for pricing).

Vertical milling column bases made after 1995 do not need to be modified. This combination saves you the amount of money included in the cost of the vertical mill for the column but gives you the same machine minus the headstock and motor/speed control.

About the 18″ NexGen Benchtop Mill XY Base

The NexGen Benchtop Mill XY base is the same base used in our 5800-series NexGen benchtop mill. It has zero adjustable handwheels, and laser-engraved scales on the table and base.

Standard Features for the NexGen Benchtop Mill XY Base

  • 18″ Mill Base
  • 18″ Extended Mill Table
  • 2″ (51mm) resettable, zero adjustable handwheels on the X- and Y-axes. Each handwheel has laser-engraved aluminum handwheel collars.
  • Oil reservoir on the X/Y axes
  • Travel: X=8.65″ (220 mm), Y=11.0″ (279 mm)

Optional Y-axis Leadscrew Cover Upgrades for the Mill XY Base

Brass tube cover for the rear of the Y-axis*
Accordion way cover for the front and rear of the Y-axis
Rigid Mill Column Base

*You must purchase the Rigid Mill Column Base (P/N 50055 or 50056) to work with the brass tube cover. The round column base of the 8-direction mill will not fit on this base.

warning-symbol
The improper use of machine tools and their accessories can result in serious injury. Before using this tool, thoroughly read the instructions and make sure you understand its proper and safe use.

safety-glasses-symbol

Always wear safety glasses when operating machine tools.

Download PDF 5200 Instructions

Instructions PDF Download

XY Base Comparison Chart
P/N (inch/metric) NAME WEIGHT TRAVEL
5200/5210 Mill XY Base (10″ base, plain handwheels) 19 lbs. X=9.0″ (228 mm), Y=3.0″ (76 mm)
5220/5225 Mill XY Base (10″ base w/ adjustable handwheels) 19 lbs. X=9.0″ (228 mm), Y=3.0″ (76 mm)
5200-CNC/5210-CNC Mill XY Base (10″ base) with stepper motor mounts ready for CNC 20 lbs. X=9.0″ (228 mm), Y=3.0″ (76 mm)
5401/5411 Mill XY Base (Deluxe 12″ base) 21 lbs. X=9.0″ (228 mm), Y=5.0″ (127 mm)
5401-CNC/5411-CNC Mill XY Base (12″ base) with stepper motor mounts ready for CNC 22 lbs. X=9.0″ (228 mm), Y=5.0″ (127 mm)
5600/5610 Mill XY Base (Deluxe 14″ 2000 base) 22 lbs. X=9.0″ (228 mm), Y=7.0″ (178 mm)
5600-CNC/5610-CNC Mill XY Base (14″ 2000 base) with stepper motor mounts ready for CNC 23 lbs. X=9.0″ (228 mm), Y=7.0″ (178 mm)
5801/5811 Mill XY Base (NexGen 18″ 5800 base) 27 lbs. X=13.65″ (347 mm), Y=11.0″ (279 mm)
5801-CNC/5811-CNC Mill XY Base (18″ 5800 base) with stepper motor mounts ready for CNC 28 lbs. X=13.65″ (347 mm), Y=11.0″ (279 mm)
Part No. Description Quantity
3420 2″ Zero Handwheel-Y-axis Assembly (P/N 3429 metric) 1
3428 2″ Zero Handwheel-X-Axis Assembly (P/N 3430 metric) 1
40280 Thrust Collar Assembly 1
40510 (3) 10-32 X 3/8″ Skt Hd Cap Screw 1
40520 10-32 X 3/16 Cup Pt Set Screw 2
40530 5-40 X 3/8″ Skt Hd Cap Screw 2
40560 Hex Key 3/16″ 1
40600 10-32 X 1/4″ Flat Pt Set Screw 1
40690 10-32 X 3/4″ Skt Hd Cap Screw 1
40760 10-32 X 5/8″ Thumb Screw 1
40820 Gib Lock 2
40890 Slide Screw Insert (P/N 41890 metric) 1
40980 Crosslide Gib 2
45070 Lock (Teflon) 1
50130 Back Lash Nut, X-axis Assembly (P/N 51130 metric) 1
50140 Back Lash Nut, Y-axis Assembly (P/N 51140 metric) 1
50150 Anti-Backlash Lock (10/98) 2
50172 Lead Screw, X-axis Assembly (P/N 51172 metric) 1
50190 Lock, X-axis Assembly 2
50200 Nut, Y-axis (P/N 51200 metric) 1
50211 8-32 X 1/4″ Button Skt Screw 2
50280 Thrust Collar (Mill) 1
50911 Mill Saddle W/Oiler Assembly 1
54182 18″ Extended Mill Table 1
56010 18″ Anodized Mill Base 1
56190 18″ Mill Y-axis Screw Assembly (P/N 56191 metric) 1
56240 1/4-20 X 1-1/2″ Skt Hd Cap Screw 2