3/8″ Drill Chuck with #1 Morse Arbor
3/8″ Drill Chuck plus chuck key, drawbolt and #1 Morse arbor.
The P/N 3073 3/8″ chuck includes a #1 Morse arbor and drawbolt, so that it can be mounted in the headstock of the lathe or mill. P/N 3072 has the same size capacity as the P/N 1069 chuck, which is 3/32″ to 3/8″ drill sizes.
NOTE: If runout of less than .003″ amount is required, collets should be used to hold the drill rather than a chuck.
Always wear safety glasses when operating machine tools.
|Chuck Capacity||3/32″ (2.4 mm) – 3/8″ (9.5 mm)|
|Arbor||#1 Morse for headstock|
|Runout||.003″ or less|
|Includes||chuck key, drawbolt+washer and 1 arbor|
|11861||Rohm S8 chuck key|
|11880||threaded arbor – #1 Morse taper||11801||3/8″ drill chuck body|
|30880||1/4-20 x 5″ drawbolt with centering washer (for #1 Morse arbor)|