3.1″ 3-Jaw Chuck

-

Includes 2 tommy bars, not pictured

Product Description

This larger chuck takes up no more center-to-center space than the 2.5″ chuck, but it will hold larger work. It has a clamping range of 3/32″ (2 mm) up to 1-1/2″ (38 mm) diameter with the jaws in the normal position. With the jaws in the reversed position, work up to 3-1/4″ (82.5mm) can be gripped. The hole through the chuck is .687″ (17 mm). Rotating the knurled ring closes all three jaws simultaneously to grip round or hexagonal stock quickly. Tommy bars (provided) are used in the side holes to tighten and loosen the chuck for more leverage. The chuck has a 3/4-16 thread to fit Sherline’s spindle.

Jaw Options

  • For those who have jobs where speed and ease of use are more important than maximum accuracy and want a chuck that is loose right from the start (No extra charge).
    Add the note “loose jaws” to the comments box above
  • Soft (not hardened or machined) steel jaws are also available when you build your own chuck.

warning-symbol
The improper use of machine tools and their accessories can result in serious injury. Before using this tool, thoroughly read the instructions and make sure you understand its proper and safe use.

safety-glasses-symbol

Always wear safety glasses when operating machine tools.

Download PDF 1040 Instructions

Instructions PDF Download

Chuck Diameter 3.1″
Jaw Capacity With jaws in normal position: 3/32″ (2mm) – 1-1/2″ (38mm)

With jaws in reverse position: 3/32″ (2mm) – 3-1/4″ (82.5mm)

Through Hole Diameter .687″ (17mm)
Thread Size 3/4-16
Chuck Body Material 12L14 Steel
Chuck Jaws Material 12L14 Case Hardened Steel
I.D. Holding diameter of jaws
NOTE: The diameters shown on the print can vary as much as .010-.020 depending on the amount of material that is removed during the grinding operation.
Click on the image for a larger view.
Part No. Description Quantity
10401 3.1″ 3 Jaw Chuck Body *Not sold separately 1
10402 3.1″ Chuck Scroll *Not sold separately 1
10413 Chuck Retainer Ring 1
10414 3 Jaw Chuck Jaw* 3
40580 Tommy Bar 2

*Because chuck jaws are factory ground to precisely match each chuck body you must send your chuck back to us to be fitted with new jaws. Please contact us for instructions on how to return your chuck.

Click the P/N below to download a zipped version of the IGS 3D CAD file. You will need to extract the zip file before viewing the IGS file.
1040 3.1″ 3-Jaw Chuck 3D IGS model
You need an IGS viewer to view .igs files. CLICK HERE to download a FREE IGS viewer.