3/8″ Rear Side Multi-Tool Holder
Tools not included, shown for reference only
The rear side, multi-tool holder, was designed to complement our four-position, gang-tooling tool posts. It can be used in conjunction with the gang-tooling tool post or on its own for our customers who want to convert their Sherline lathe into a “Chucker Lathe” or gang-tooling lathe.
The rear-mount tool holder is slightly taller than its front-side counterpart, P/N 5932, allowing the tool to be mounted upside down and used on the backside of the crosslide. The round holes are for holding boring tools on center (tool not included) like Sherline’s own right- and left-hand 55° inserted tip tool holders.
Our rear side, multi-tool holder, offers a convenient and accurate way to hold up to two round boring tools with a known center-line-to-center-line distance of 1.500″ and a slot to hold 3/8″ square carbide tool holders on the “back” side of the part for turning, grooving, or threading tools.
We also offer a rear-side, multi-tool holder for customers who want to use ER16 collet holders with a 5/8″ shank.
For video instructions on “Indicating in Your Gang-Tooling Tool Post,” click on the Video tab above, or visit our Videos page.
Includes the following:
- 3/8″ Rear Side, Multi-Tool Post Body
- 10-32 x 1-1/8″ SHCS (2)
- Extended Tool-Post T-Nut (2)
- 10-32 x 3/4″ SHCS (6)
- #10 Washer (2)
- Steel Dowel Pin 1/4″ x 3/4″ (2)
Considerations Regarding This Tool Holder and Its Possible End Uses
There are many considerations regarding this tool post and its possible end uses. Please check the instructions for a complete list (click on the Instructions tab above to download the document).
Available Gang Tool Posts
Always wear safety glasses when operating machine tools.
Indicating in your Sherline Gang-Tooling Tool Post
Insert Holder Tool Post
|Tool Post Body Material||Aluminum|
|Body Coating||Black Anodized|
|Body Dimensions (H x W X D)||1.7″ x 3.764″ x 1.1875″|
|Tool Holes||1.5″ between centers|
|59310||3/8″ Rear Side Multi-Tool Post Body||1|
|40780||10-32 x 1-1/8″ SHC Screw||2|
|40250||Extended Tool-Post T-Nut||2|
|40690||10-32 x 3/4″ SHC Screw||6|
|59303||Steel Dowel Pin 1/4″ x 3/4″||2|