13″ Lathe Crosslide and Saddle Assembly – Manual

-

Clear selection
    Reset options

Product Description

About the 13″ Crosslide and Saddle Assembly

This 13″ lathe crosslide is for those who want to convert their Sherline lathe into a “Chucker Lathe” or gang-tooling lathe. The 13″ crosslide can hold multiple gang-tooling tool posts.

The 13″ lathe crosslide is .870″ thick (as opposed to the standard 6″ crosslide, which is .625″ thick) and is not recommended to replace your lathe crosslide for normal use. The extra thickness of this crosslide requires a headstock riser plate (P/N 1295) to put tooling on center with the headstock. When you switch to a gang-tooling setup using the 13″ crosslide along with a riser plate, you will no longer be able to use your tailstock! We make a riser for the headstock but not one for the tailstock, so parts cannot be turned between centers. Some of our other accessories, such as the thread-cutting attachment, can also not be used with this thicker crosslide.

The 13″ lathe crosslide and saddle assembly includes a leadscrew and a standard 1-5/8″ handwheel.

 

4488x_exploded view
Click on the image for a larger view.
Part No. Description Quantity
32140 10-32 x 1/2″ Cup Point Set Screw 1
40050
41050
Y-Axis Handwheel (Inch)
Y-Axis Handwheel (Metric)
1
40280 Thrust Collar 1
40330 10-32 x 5/8″ SHCS 1
40530 5-40 x 3/8″ SHCS 1
40600 10-32 x 1/4″ Flat Point Set Screw 3
40820 Gib Lock 2
40890
41890
Slide Screw Insert (Inch)
Slide Screw Insert (Metric)
1
40910 Lathe Saddle 1
40980 Crosslide Gib 1
40990 Saddle Gib 1
50130L
51130L
Lathe Anti-Backlash Nut (Inch)
Lathe Anti-Backlash Nut (Metric)
1
50150 Anti-Backlash Lock 1
50170
51170
Leadscrew, X-axis (Inch)
Leadscrew, X-axis (Metric)
1
50180 Mill Table 1
50211 8-32 x 1/4″ Button Socket Screw 1