Headstock Spacer/Riser Block

-

SKU: 1297 Categories: ,

Product Description

About the Headstock Apacer

This riser can be used on both a vertical milling machine and a lathe. Having the option to extend the headstock further out on the mill can sometimes allow surfaces to be machined that could not otherwise be reached without breaking down the setup and re-clamping the part. The spacer moves the spindle out an additional 1.235″ (31.37 mm). In many cases, it is much easier to increase your machinable surface area by using this spacer than it is to re-clamp the part. Precisely machined keyways keep the headstock accurately aligned. A precision ground alignment key is included. The headstock spacer block increases the maximum working diameter of the lathe to 6″ (152mm)

NOTE: This part is the same as the lathe headstock spacer block, so you need not duplicate it if you already have the spacer block kit unless you wish to leave the spacer block in place on either the lathe or mill and don’t wish to deal with changing it back and forth between machines. Also, note that the Model 5400 mill comes with this spacer block as part of its standard equipment. The 2000 and 5800-series mills have ram in/out adjustment that, for the most part, eliminates the need for this accessory, so it is not included with those mills. There may still be special setups where you would find it useful on those machines as well.

 

warning-symbol
The improper use of machine tools and their accessories can result in serious injury. Before using this tool, thoroughly read the instructions and make sure you understand its proper and safe use.

safety-glasses-symbol

Always wear safety glasses when operating machine tools.


Download PDF 1291 Instructions

Instructions PDF Download

Riser Block
Riser Block Body Material Aluminum
Body Coating Black Anodized
Body Dimensions (H x W X D) 1.235″ x 2.5″ x 3″
Pivot Pin Case Hardened 12L14 Steel
Alignment Key Material Precision Ground Steel
12950 Headstock Riser Block
12980 1/4-20 X 3/8″ Flat Head Machine Screw, Slotted
12990 Riser Pivot Pin
40260 Precision Ground Head Key
40540 5/16-18 X 3/4″ Cone Point Set Screw