This small 3-cylinder radial
airplane engine was
built by Jesse Brumberger of Macedon, New York. Jesse was a contestant
in the North American Model Engineering Society show's contest for
miniature machining projects. Sponsored by Sherline, the contest
features small machining projects of all kinds, costs nothing to enter and
awards cash prizes. For more details on the contest, see the section on the
N.A.M.E.S. Contest.
SHERLINE
Chucks and Accessories Price List
Prices are updated regularly but are subject to change. The table below lists the other Sherline price lists available for viewing.
If you don't know the part number of the accessory you are looking for, try the PART NUMBER FINDER. It is organized by machine and section to give you part names, followed by their number.
To view Sherline Machine Tool and Chuck Prices, click here.
To view Sherline Replacement Parts prices, click here.
To view Sherline Cutting Tool Prices, click here.
You may also view the price lists as .pdf (portable document format) files if you have a small program called Adobe Acrobat Reader. If you do not have this program, it can be downloaded free of charge from Adobe's site at www.adobe.com. The high quality of this file will allow you to print out our regular price list on your own printer. You can then fill in the quantities and amounts and fax it back to us a copy as an easy way to place an order. To see the prices lists, click on the appropriate link below:
• CHUCKS AND COLLETS PRICES.pdf
• MILL ACCESSORY PRICES.pdf (Includes Books and Videos)
• CUTTING TOOLS PRICE LIST.pdf
Calculating
estimated UPS shipping costs...
UPS provides a handy on-line calculator for figuring shipping costs. Click on the link below to go to their estimating site. Enter the following items: ORIGIN, Zip Code: 92081; DROP-OFF: Daily Pickup Service; PACKAGING: Your packaging; WEIGHT: (provide total from price list plus add 10% for packaging materials); SIZE: (leave blank).
Sherline Annotated Chuck and Accessory Price List
Last updated: 8/30/10
Accessories
used with the lathe are shown with the part number in red
Accessories used with the mill are shown with the part
number in blue
Accessories used with non-Sherline machines are shown with the part number in
purple
Accessories that can be used with either the lathe or mill are shown with the
part number in black
SHERLINE CHUCKS |
|||
|
PART NO. |
PRODUCT NAME AND USE |
WT/ |
PRICE |
| 1010 | 0JT 5/32" Jacobs drill chuck w/ #1 Morse arbor, drawbolt and key (For holding small drill bits 5/32" and smaller in the lathe or mill headstock) | 0.5 | $70.00 |
| 1012 | Sensitive drilling attachment (See Accessories section following chuck section) (With 5/32" Jacobs chuck for holding drill bits 5/32" and smaller) | 2.0 | 110.00 |
| 1015 | 0JT 5/32" Jacobs drill chuck w/ #0 Morse arbor and key (For holding small drill bits 5/32" and smaller in the lathe tailstock) | 0.5 | 70.00 |
| 1016 | 0JT 5/32" Jacobs drill chuck w/ #0 Morse Adjustable Tailstock back and key (For holding small drill bits 5/32" and smaller in the lathe tailstock. Adjustable back for perfect centering with headstock) | .5 | 100.00 |
| 1030 | 4-Jaw Chuck (3.125" O.D.) (Independent jaws adjust individually with hex key) | 2.0 | 135.00 |
| 1031** | 14 x 1 mm 3-jaw chuck (2.5" O.D.) (Self-centering, for use on later Unimat 3 lathes) | 2.0 | 120.00 |
| 1035** | 14 x 1 mm 4-jaw chuck (2.5" O.D.) (Independently adjusted jaws, for use on later Unimat 3 lathes) | 2.0 | 120.00 |
| 1040 | 3-Jaw Chuck (3.125" O.D.) (Self-centering) | 2.0 | 130.00 |
| 1041 | 3-Jaw Chuck (2.5" O.D.) (Self-centering) | 2.0 | 100.00 |
| 1044 | 4-Jaw Chuck (2.5" O.D.) (Independent jaws adjust individually with hex key) | 2.0 | 110.00 |
| 1068* | 12 x 1 mm 3-jaw chuck (2.5" O.D.) w/ reversible jaws (Self-centering, for use on early Unimat lathes) | 2.0 | 120.00 |
| 1069 | 3/8" Jacobs Tailstock Drill Chuck w/ #0 and #1 Morse arbors, drawbolt and key (use on headstock or tailstock, holds drill bits sized from 3/32" to 3/8") | 1.5 | 65.00 |
| 1070*** | 1/2-20 3-Jaw (2.5" O.D.) (Self-centering, for use on older 6" Sears lathes) | 2.0 | 120.00 |
| 1071* | 12 x 1 mm 4-jaw chuck (2.5" O.D.) (Independently adjusted jaws, for use on early Unimat lathes) | 2.0 | 120.00 |
| 1072 | 1/4" Jacobs tailstock drill chuck w/ #0 and #1 Morse arbors, drawbolt and key | 0.5 | 55.00 |
| 1073*** | 12-20 4-Jaw Chuck (2.5" O.D.) (Independently adjusted jaws. for use on older Sears 6" lathes) | 2.0 | 120.00 |
| 1075 | Self-centering 4-Jaw Chuck (2.5" O.D.) (Jaws scroll together like 3-jaw chuck, for holding machined round, square or hex stock or tubing. Not recommended for stock that is not perfectly round or square) | 2.0 | 130.00 |
| 1076 | Self-centering 4-Jaw Chuck (3.125" O.D.) (Jaws scroll together like 3-jaw chuck, for holding machined round, square or hex stock or tubing. Not recommended for stock that is not perfectly round or square)New, 5/04! | 2.0 | 165.00 |
| 3072 | 1/4" Jacobs Drill Chuck w/ #1 Morse arbor, drawbolt and key (#0 Morse arbor not incl. See P/N 1072 if you need both arbors, holds drill bits sized from 3/32" to 1/4") | 0.5 | 50.00 |
| 3073 | 3/8" Jacobs Drill Chuck w/ #1 Morse arbor, drawbolt and key (#0 Morse arbor not incl. See P/N 1069 if you need both arbors, holds drill bits sized from 3/32" to 1/4") | 0.75 | 60.00 |
|
*12 x 1 mm threads for use on Unimat SL 1000 **1/2-20 threads for use on old Sears 6" lathe ***14 x 1 mm threads for use on Unimat 3 or Cowells lathes |
|||
SHERLINE ACCESSORIES |
|||
|
PART NO. |
PRODUCT NAME AND USE |
WT/ |
PRICE |
|
1012 |
SENSITIVE DRILLING ATTACHMENT (Threads onto mill spindle. Spring loaded 5/32" chuck is pulled down by hand using a bearing supported knurled collar. Provides quick action and great "feel" when drilling small holes.) | 2 | $110.00 |
|
1074 |
STEADY REST (Supports the end of long work for center drilling) |
.75 |
40.00 |
|
1090 |
FOLLOWER REST (Supports thin work, keeps it from deflecting away from the cutter, moves with the lathe saddle to "follow" the work) |
.75 |
70.00 |
|
1160 |
WW COLLET SET (Metric P/N 1178) (P/N 1161 included in set) (Collets are like small, individually sized chucks for holding a specific diameter tool or material. WW collets have a hole through the collet and drawbar to accept long material. Traditionally used by watch and clock makers. Sherline WW collets have a .312-.313 body size and .275-40 thread.) |
.5 |
90.00 |
| 116000 + size | WW COLLET, CUSTOM SIZE (Custom size collets can be ordered in sizes from .050" to .320" or 1.28 mm to 8.13 mm. For example, a custom collet might be ordered as 116000 .100" or 116000 2.75 mm.) Custom collets are not laser engraved with size information. Allow 3 weeks for delivery. | .05 | 40.00 |
| 116000 | WW COLLET BLANK, Large Head | .05 | 11.00 |
| 1160001 | WW COLLET BLANK, Small Head | .05 | 11.00 |
| 116001 | 1/64" WW COLLET | .05 | 40.00 |
| 116002 | 1/32" WW COLLET | .05 | 32.00 |
| 116003 | 3/64" WW COLLET | .05 | 21.00 |
| 116004 through 116020 | WW COLLETS from size 1/16" to 5/16" by 64ths. The part number is given as 1160__ plus the number of 64ths to denote size. For example, 13/64" is P/N 116013 and a 1/4" collet (16/64") is P/N 116016. | .05 | 17.00 ea. |
|
1161 |
WW COLLET ADAPTER & DRAWBAR (Included in collet set. Adapts WW taper to #1 Morse taper of Headstock) |
.5 |
50.00 |
|
1162 |
DELUXE WW COLLET SET (Inch) (17 collets, adapter, drawbar, pot chucks, knockout bar, etc. in wooden case) |
3 |
275.00 |
|
1163 |
8.0 MM COLLET ADAPTER & DRAWBAR (WW collets vary somewhat depending on manufacturer. This adapter holds those with a .314-.315 body size) |
.5 |
55.00 |
| 1164 | WW COLLET FIXTURE (Allows WW collets with .312-.313 body to be held on face of rotary table or mill table.) | 1 | 105.00 |
| 1165 | 8.0 MM COLLET FIXTURE (Allows WW collets with .314-.315 body to be held on face of rotary table or mill table.) | 1 | 115.00 |
| 1170 | OAK WW COLLET STORAGE BOX (A high quality storage box that holds up to 22 WW collets plus collet pot chucks, drawbar, knockout bar and WW collet adapter. Beveled corners, brass hardware, satin lacquer finish.) | 1 | 30.00 |
| 1171 | OAK WW COLLET STORAGE BOX (A high quality storage box that holds up to 96 WW collets. Beveled corners, brass hardware, oak insert with 96 holes, satin lacquer finish.) | 1 | 32.00 |
| 117803 | .3 mm WW COLLET | .05 | 40.00 |
| 117804 | .4 mm WW COLLET | .05 | 40.00 |
| 117805 through 117808 | WW COLLETS from size .5mm through .8 mm by .1 mm increments. The Part number is given as 11780 plus the collet size in .1 mm. For example, a .6 mm collet would be P/N 117806 | .05 | 40.00 ea. |
| 117809 through 117814 | WW COLLETS from size .9mm through 1.4 mm by .1 mm increments. The part number is given as 11780_ or 1178__ plus the collet size in .1 mm. For example, a 1.1 mm collet would be P/N 117811. | .05 | 32.00 ea. |
| 117815 through 117880 | WW COLLETS from size 1.5 mm through 8.0 mm by .1 mm increments. The part number is given as 1178__ plus the collet size in .1 mm. For example, a 6.4 mm collet would be P/N 117864. | .05 | 17.00 ea. |
|
1179 |
DELUXE WW COLLET SET (Metric) (14 collets, pot chucks, etc. in wooden case. P/N 1161 included in set) |
3 |
245.00 |
|
1180 |
COMPLETE METRIC WW COLLET SET with 78 collets sized from .3 mm to 8.0 mm by .1 mm increments plus a blank collet. The set is contained in a P/N 1171 oak collet box with 96-hole oak insert. | 4 | 935.00 |
|
1182 |
BULLNOSE LIVE CENTER (Supports tubing or stock with a large end hole when turning between centers. Dual preloaded bearings.) |
.75 |
80.00 |
|
1185 |
VERTICAL MILLING TABLE (Metric P/N 1184) (Mounts to lathe or mill table to move work up and down. Has 2.25" of vertical travel and 8" long table.) (Metric P/N 1184) |
2.5 |
120.00 |
|
1187 |
CHUCK-TO-T-SLOT ADAPTER (Allows 3- or 4-jaw chuck to be quickly screwed to mill table.) |
.06 |
7.50 |
|
1191 |
LIVE CENTER (Ball bearings allow center to rotate with part to reduce friction when turning between centers) |
.25 |
40.00 |
|
1201 |
ADJUSTABLE LIVE CENTER (Ball bearing live center adjusts for perfect centering of headstock and tailstock) |
.5 |
65.00 |
|
1202 |
ADJUST. TAILSTOCK CHUCK ARBOR (Allows perfect centering of tailstock chuck in relation to headstock) |
.5 |
45.00 |
|
1203 |
ADJUST. TAILSTOCK TOOL HOLDER (Allows perfect centering of round tools held in tailstock) |
.5 |
45.00 |
|
1206 |
ADJUST. TAILSTOCK 1" DIE HOLDER w/ 13/16" bushing (Allows perfect centering of 1" or 13/16" threading dies) |
.5 |
60.00 |
|
1220 |
TAILSTOCK SPINDLE EXTENDER (Designed for lathes built before July, 1996 to extend reach of tailstock spindle over table. Not needed on newer lathes) |
.5 |
40.00 |
|
1230 |
#0 MORSE ARBOR TO 3/4-16 CHUCK THREAD ADAPTER (Allows a 3- or 4-jaw chuck to be mounted on the tailstock spindle) |
.5 |
40.00 |
|
1270 |
COMPOUND SLIDE (Redesigned, Replaces P/N 1080) (metric P/N 1280) (An alternate and more traditional way of turning tapers) |
1 |
125.00 |
|
1272 |
COMPOUND SLIDE RISER BLOCK (Raises compound slide about 1" for use on front side of crosslide with riser blocks in place on lathe) | .5 | 35.00 |
| 1288 | RISER ROCKER TOOL POST (Taller tool post for use with riser blocks in place on the lathe) | .5 | 40.00 |
| 1289 | RISER 3/8" INSERT TOOL POST (Taller tool post for holding 3/8" shank tools with riser blocks in place on the lathe.) | .5 | 40.00 |
|
1290 |
STEADY REST RISER (Lifts steady rest to match headstock when spacer block is in place. Used mainly by those who leave spacer blocks in place at all times on their lathe.) |
.25 |
50.00 |
|
1291 |
SPACER BLOCK KIT (Lifts headstock 1.25" to allow parts up to 6" diameter to be turned. Includes extended riser rocker tool post) |
1.5 |
70.00 |
|
1292 |
TAILSTOCK RISER BLOCK (Lifts tailstock 1.25" for turning between centers with headstock riser block in place) |
1 |
50.00 |
|
1296 |
CUTOFF TOOL HOLDER RISER BLOCK (Lifts cutoff tool P/N 3002 for use with riser blocks in place. Used with tool upside down on back side of crosslide table.) | .5 | 50.00 |
|
1297 |
MILL HEADSTOCK SPACER BLOCK (Same as riser block for lathe, but without tool post. Adds 1.25" of throat distance when milling) |
.75 |
45.00 |
|
1300 |
MILL COLUMN SPACER BLOCK (Raises column base 2" for greater Z-axis clearance. Includes longer bolts for mounting.) | 1.50 | 40.00 |
|
2045 |
HEX AND OCTAGON INDEX BLOCK SET (Fits in mill vise to allow simple indexing of 2, 3, 4, 6 or 8 sides or hole patterns) |
2 |
60.00 |
|
2049 |
SPINDLE HANDWHEEL (Used to rotate the headstock spindle much like the large handwheel on a sewing machine is used) |
1.5 |
45.00 |
|
2083 |
WW COLLET 1" BLANK (Make your own custom tool holder or collet that is held with the WW adapter and drawbar) |
.06 |
30.00 |
|
2085 |
WW COLLET TAILSTOCK ADAPTER (Use with P/N 1203) (Allows WW collets to be held in the tailstock) |
.25 |
55.00 |
|
2086 |
8mm COLLET TAILSTOCK ADAPTER (Use with P/N 1203) |
.25 |
60.00 |
|
2090 |
8.0mm COLLET TO 3/4-16 THREAD (For mounting Sherline chuck on watchmaker's or jeweler's lathe that takes 8.0mm collets) |
.5 |
40.00 |
|
2091 |
10mm "D" COLLET TO 3/4-16 THREAD (For mounting Sherline chuck on watchmaker's or jeweler's lathe that takes 10mm D collets, not for use on Sherline lathe.) |
.5 |
45.00 |
|
2092 |
8.0mm COLLET TO 3/8-24 THREAD (For mounting chuck with 3/8-24 thread on watchmaker's or jeweler's lathe that takes 8.0mm collets, not for use on Sherline lathe.) |
.5 |
40.00 |
|
2093 |
10.0mm COLLET TO 3/8-24 THREAD (For mounting chuck with 3/8-24 thread on watchmaker's or jeweler's lathe that takes 10mm D collets, not for use on Sherline lathe.) |
.5 |
45.00 |
|
2094 |
CLOCKMAKER'S GEAR CUTTING ARBOR, 7.0mm to Morse #1 (Arbor for use on watchmaker or jeweler's lathes to hold round gear cutter, Not for use on Sherline lathe) |
.5 |
60.00 |
|
2095 |
CLOCKMAKER'S GEAR CUTTING ARBOR, 7.0mm to 10mm "D" Collet (Arbor for use on watchmaker's or jeweler's lathes to hold round gear cutter. not for use on Sherline lathe) |
.5 |
60.00 |
|
2096 |
CLOCKMAKER'S GEAR CUTTING ARBOR, 7.0mm to 8.0 mm WW Collet (Arbor for use on watchmaker's or jeweler's lathes to hold round gear cutter, not for use on Sherline lathe) |
.5 |
60.00 |
|
2100 |
WW 3/4" COLLET POT CHUCK (Collet pot chucks are like small chucks custom turned to hold a particular part. The part is held in a depression turned in the surface of the pot chuck and does not go all the way through. Includes dowel pin to clamp on while turning to size.) |
.06 |
25.00 |
|
2101 |
WW 1" COLLET POT CHUCK (See 2100) |
.06 |
27.00 |
|
2102 |
WW 1-1/4" COLLET POT CHUCK (See 2100) |
.06 |
30.00 |
|
2103 |
10mm 3/4" COLLET POT CHUCK (Not for use on Sherline lathe) |
.12 |
35.00 |
|
2104 |
10mm 1" COLLET POT CHUCK (Not for use on Sherline lathe) |
.12 |
40.00 |
|
2105 |
10mm 1-1/4" COLLET POT CHUCK (Not for use on Sherline lathe) |
.12 |
45.00 |
|
2106 |
LIVE CENTER-TO-8mm COLLET (A live center for watchmaker's or jeweler's lathes.) |
.25 |
75.00 |
|
2107 |
LIVE CENTER-TO-10mm COLLET (A live center for watchmaker's or jeweler's lathes.) |
.25 |
75.00 |
|
2110 |
W.R. SMITH WATCHMAKER'S T-REST (Used on Sherline lathes to support a hand-held "graver", a traditional watchmaker's tool. Turns Sherline lathe into a first class watch or clock maker's lathe. Designed by famed craftsman W.R. Smith. Graver-making instructions included.) |
1 |
200.00 |
|
2125 |
MICROSCOPE AND LATHE MOUNT (Mounts to table of either 4000 or 4400 series lathe. Magnifies work area using high quality stereo microscope. Microscope is complete with stand and eyepieces for use as a separate inspection scope as well as being mounted on the lathe.) |
25 |
775.00 |
| 2126 | MICROSCOPE MOUNT FOR LATHE (Does not include microscope. Designed for microscope offered by Sherline.) |
3 |
126.00 |
| 2127 | MICROSCOPE AND MILL MOUNT (Mounts to headstock on any Sherline mill. Adjusts up/down and swings over 90° from center front to side view. Microscope is complete with stand and eyepieces for use as a separate inspection scope as well as being mounted on the mill.) |
25 |
865.00 |
| 2128 | MICROSCOPE MOUNT FOR MILL (Does not include microscope. Designed for microscope offered by Sherline.) |
3 |
225.00 |
|
2200 |
RADIUS CUTTING ATTACHMENT (For cutting ball ends, convex and concave radii on ends of parts and even complete balls) |
1 |
120.00 |
|
2250 |
QUICK CHANGE TOOL POST w/ 3 holders (Saves time when changing tools. Holders included for 1/4" cutter, round boring tool and cutoff tool. Cutting tools not included.) |
3 |
260.00 |
|
2251 |
QUICK CHANGE TOOL POST RISER (Brings quick-change tool post up to proper centerline height when using a riser block under the headstock for cutting larger diameters.) |
1.75 |
50.00 |
| 2253 |
RIGHT-HAND 35° OFFSET CARBIDE INSERT TOOL HOLDER w/ 80° INSERT (Includes one 80° insert) (Use in 7600 tool post. Carbide is used to cut hard-to-machine materials like stainless steel) (Replacement inserts P/N 7608) |
.25 | 50.00 |
| 2254 |
LEFT-HAND 35° CARBIDE INSERT TOOL HOLDER w/ 80° INSERT (Includes one 80° insert) (Use in 7600 tool post. Carbide is used to cut hard-to-machine materials like stainless steel) (Replacement inserts P/N 7608) |
.25 | 50.00 |
| 2255 |
PAIR OF RIGHT- and LEFT-HAND 35° 3/8" CARBIDE INSERT TOOL HOLDERS w/ 80° INSERTS (Includes one 80° insert per holder) (Replacement inserts, P/N 7605) (For use with P/N 7600 toolpost.)(Save $20 by buying both LH and RH tools together) (Replacement inserts P/N 7608) |
.25 | 90.00 |
|
2256 |
RIGHT-HAND 35° CARBIDE INSERT TOOL HOLDER w/ 55° INSERT (Includes one 55° insert) (Use in 7600 tool post. Carbide is used to cut hard-to-machine materials like stainless steel) (Replacement inserts, P/N 7605) |
.25 |
45.00 |
|
2257 |
LEFT-HAND 35° CARBIDE INSERT TOOL HOLDER w/ 55° INSERT (Includes one 55° insert) (Use in 7600 tool post. Carbide is used to cut hard-to-machine materials like stainless steel) (Replacement inserts, P/N 7605) |
.25 |
45.00 |
|
2258 |
PAIR OF RIGHT- and LEFT-HAND 35° 3/8" CARBIDE INSERT TOOL HOLDERS w/ 55° INSERTS (Includes one 55° insert per holder) (Replacement inserts, P/N 7605) (For use with P/N 7600 toolpost.)(Save $20 by buying both LH and RH tools together) |
.5 |
70.00 |
| 2259 | 80° CARBIDE INSERT 3/8" ROUND BORING TOOL, 1/2" min. hole, carbide insert included (Use w/ P/N 7600 tool post) (Replacement inserts, P/N 7608) | .15 | 60.00 |
| 2260 | 55° CARBIDE INSERT 3/8" ROUND BORING TOOL, 3/4" min. hole, carbide insert included (Use w/ P/N 7600 tool post) (Replacement inserts P/N 7605) | .15 | 60.00 |
| 2261 | PAIR OF ABOVE 80° (P/N 2259) AND 55° (P/N 2260) 3/8" ROUND BORING TOOLS w/ inserts (Replacement inserts P/N 7608) | .25 | 95.00 |
| 2262 | STRAIGHT 55° INSERT 3/8" SQUARE SHANK TOOL HOLDER w/ 55° INSERT (Includes one 55° insert) (se | .25 | 50.00 |
| 2265 | 3/8" NEGATIVE RAKE CERAMIC INSERT TOOL HOLDER (Includes one 3-sided ceramic insert for six cutting surfaces.) (For cutting very hard metals like tool steel. Has a 3/8" shank for use in P/N 7600 tool post.) | .25 | 60.00 |
| 2266 | CERAMIC 3-SIDED REPLACEMENT INSERT For 2265 Holder NEW 3/07! | .05 | 15.00 |
| 2267 | 3/8" THREADING AND GROOVING INSERT TOOL HOLDER (Inserts not included. 3/8" shank requires P/N 7600 Toolpost.) NEW 7/07! | .15 | 52.50 |
| 2268 | 60° CARBIDE THREADING INSERT for 2267 holder (2 sides) | .05 | 23.00 |
| 2269 | .031" CARBIDE GROOVING INSERT for 2267 holder (2 sides) | .05 | 23.00 |
| 2270 | .062" CARBIDE GROOVING INSERT for 2267 holder (2 sides) | .05 | 23.00 |
|
2280 |
1/4" QUICK-CHANGE TOOL BIT HOLDER (Incl. w/ 2250) |
1 |
60.00 |
|
2285 |
3/8" QUICK-CHANGE BORING TOOL HOLDER (Incl. w/ 2250) |
1 |
60.00 |
|
2290 |
QUICK-CHANGE CUTOFF TOOL HOLDER (Incl. w/ 2250) |
1 |
80.00 |
|
2295 |
CARBIDE INSERT HOLDER for QUICK-CHANGE TOOL POST |
1 |
90.00 |
|
3001 |
POWER FEED (120V.) (for 240V. see P/N 3011) (Single direction motor drives lathe leadscrew .9" per minute to provide smooth final cut on long parts. Not designed for use with thread cutting attachment.) |
5 |
90.00 |
|
3002 |
CUTOFF TOOL & HOLDER (for cutting off work piece from the raw stock from which it was turned. Often called a "parting tool".) |
.25 |
50.00 |
|
3003 |
TWO-POSITION TOOL POST (Holds two 1/4" cutting tools for quicker tool changes) |
.25 |
16.00 |
|
3004 |
KNURLING TOOL HOLDER (Makes knurled finishes. Includes one set of spiral knurls. Other sizes and patterns available) |
.25 |
75.00 |
|
3005 |
1/4" SQ. HIGH SPEED STEEL TOOL BLANK (Sharpen yourself on a bench grinder for standard or custom-shaped tools) |
.06 |
3.00 |
|
3006 |
CARBIDE TOOL SET (3 PC) (LH, RH, 60° THREADING) (Carbide tips are brazed to 1/4" tool shanks. For cutting hard materials) |
.38 |
20.00 |
|
3007 |
HIGH SPEED STEEL TOOL SET (3 PC) (LH, RH, BORING) (Pre-sharpened to save you time. For cutting most materials) |
.12 |
25.00 |
|
3008 |
TWO-POSITION TOOL POST, 5/16" - 3/8" (Holds 5/16" tool on one side, 3/8" on other side. Allows use of tools other than 1/4") |
.25 |
25.00 |
|
3009 |
CUTTING TOOL HEIGHT GAUGE (Used to assure tool tip on resharpened tools is set to proper centerline height. Works with both regular or riser toolpost) |
.25 |
18.00 |
|
3012 |
HOLD-DOWN SET (Simple strap clamp set for clamping parts to table for milling. Includes 2 clamps, T-nuts and assorted length bolts) |
.38 |
25.00 |
|
3013 |
STEP BLOCK HOLD-DOWN SET (This is a smaller version of the sets used on most full-size mills. Quicker to use than 3012 and holds larger parts. Stepped blocks interlock to adjust height quickly. Spare block included to be cut to custom sizes) |
1 |
40.00 |
|
3015 |
TOGGLE SWITCH DUST SEAL (Use to keep fine dust out of speed control on/off switch when cutting brass or wood) |
.06 |
8.50 |
|
3016 |
CUTOFF TOOL REAR MOUNTING BLOCK (Allows 3002 cutoff tool to be mounted on "back" side of crosslide where it is out of the way and can be left in place for easy parting off. Cutoff blade mounts upside down for use in this position) |
.12 |
15.00 |
|
3017 |
CROSSLIDE ACCESSORY PLATE (Strengthens and protects lathe table when used for milling with vertical milling column. Not for use during lathe operations as tool post height will be incorrect.) |
1 |
40.00 |
|
3018 |
REAR MOUNT CUTOFF TOOL AND HOLDER |
.25 |
50.00 |
|
3020 |
SHERLINE "T" DRIVER (5/32" hex driver with T-handle adjusts majority of 10-32 screws on Sherline tool. Easy to find on your bench.) |
.12 |
6.00 |
|
3021 |
CENTER DRILL SET (3 PC., #1, #2, #3 double-ended) (Center drills don't wander off center when starting holes. 60° tip makes proper hole to match dead or live center tips for turning between centers) |
.06 |
16.00 |
|
3035 |
SPUR DRIVER (A quick way to drive wood parts when turning between centers.) |
.25 |
25.00 |
|
3038 |
WOOD TOOL REST (3" & 5" REST) (Supports hand-held wood cutting tools for wood turning) |
.75 |
55.00 |
|
3047 |
EXTENDED WOOD TOOL REST SET (For use w/ 1291) (Like 3038 only with longer shafts to match height of headstock with riser block in place) |
.25 |
60.00 |
|
3050 |
VERTICAL MILLING COLUMN (Metric P/N 3053) (Converts your lathe into a 3-axis mill in less than 30 seconds.) |
8 |
150.00 |
|
3050-CNC |
VERTICAL MILLING COLUMN, CNC READY (Metric P/N 3053-CNC) Converts lathe into a 3-axis mill. Stepper motor mount is ready to accept NEMA 23 frame size stepper motor for CNC control |
9 |
235.00 |
|
3051 |
MORSE #0 BLANK (Drill/bore to make custom tool holders for center drills, drills, reamers, etc. for quick tailstock tool changes.) (NEW 12/08!) |
.5 |
12.00 |
|
3052 |
FLY CUTTER (For quickly milling large, flat surfaces.) |
.5 |
35.00 |
|
3054 |
BORING HEAD (For enlarging holes to a precise inside diameter, uses 3/8" round boring tools) |
.5 |
70.00 |
|
3055 |
MORSE #1 BLANK (Turn on lathe and/or mill slots to make your own custom fly cutter, slitting saw holder or special tool holder) |
.5 |
16.00 |
|
3056 |
T-NUTS, 10/32 (Set of 10) |
.06 |
8.00 |
|
3057 |
ROCKER TOOL POST (Rocking insert with two screws allows adjustment of tool tip height for accurate turning. Eliminates shimming. Included on Model 4400/4410 lathes) |
.25 |
30.00 |
|
3058 |
4-JAW HOLD DOWN SET (Two angle clamps with T-nuts to clamp 4-jaw vise to any position on mill table. Included with 3551 mill vise) |
.12 |
6.00 |
|
3060 |
MILLING COLLET SET (3 PC), (Metric P/N 3090) (1/8", 3/16", 1/4") (Milling collets have a #1 Morse taper and are pulled into the headstock with a drawbolt. They do not have a through hole like WW collets. They are used to hold specific size end mills or cutters.) |
.12 |
45.00 |
|
3061 |
BORING TOOL—Max. Depth .600, Min. Hole 1/4") (Use w/ P/N 3054 boring head) |
.12 |
15.00 |
|
3063 |
BORING TOOL—Max. Depth 1", Min. Hole 5/16" (Use with P/N 3054 boring head) |
.12 |
15.00 |
|
3064 |
BORING TOOL—Max. Depth 1.5", Min. Hole 5/16" (Use w/ 3054 boring head) |
.12 |
18.00 |
|
3065 |
SLITTING SAW HOLDER (Holds small, round sawblades for cutting thin slots) |
.25 |
40.00 |
|
3070 |
2.5" Dia. x 1-5/16" STEEL BLANK (Chuck body) w/ 3/4-16 thread (A billet of 12L14 steel threaded for the Sherline spindle, ready to turn it into whatever tool or part you need. A blank canvas for machinists.) | 2 | 25.00 |
|
3074 |
Tool holder for 1/4" or 3/8" Jacobs drill chucks (3/4-16 female thread to 3/8-24 male thread adapter replaces #1 Morse arbor to allow drill chucks to be threaded on to outside thread of spindle to speed up tool changes on CNC machines. No variation in drill length when changing tools back and forth. Cannot be used with 5/32" Jacobs chucks as they do not have a threaded back.) | .5 | 35.00 |
|
3075 |
5/16" END MILL HOLDER |
.5 |
30.00 |
|
3076 |
6.0mm END MILL HOLDER |
.5 |
30.00 |
|
3077 |
8.0mm END MILL HOLDER |
.5 |
30.00 |
|
3078 |
10.0MM END MILL HOLDER (Most common size metric tool holder) |
.5 |
30.00 |
|
3079 |
3/8" END MILL HOLDER (Most common size inch tool holder. 3/8" end mills are available from many sources and are, therefore, the least expensive and available in the largest selection.) |
.5 |
30.00 |
|
6079 |
1/4" END MILL HOLDER (Holds end mills in 3080 set) |
.5 |
30.00 |
|
6080 |
3/16" END MILL HOLDER |
.5 |
30.00 |
|
6081 |
1/8" END MILL HOLDER |
.5 |
30.00 |
|
3080 |
END MILL SET (1/4" SHK) (1/8", 3/16", 1/4") |
.06 |
30.00 |
|
3087 |
3/32" MILL COLLET |
.06 |
20.00 |
|
3089 |
5/32" MILL COLLET |
.06 |
20.00 |
|
3090 |
3-PC. METRIC MILL COLLET SET w/ 3.0, 4.0 and 6.0 mm collets (See P/N 3060 for inch version set and description.) | .15 | 45.00 |
|
3091 |
7/32" MILL COLLET |
.06 |
20.00 |
|
3092 |
3.0MM MILL COLLET |
.06 |
16.00 |
|
3093 |
4.0MM MILL COLLET |
.06 |
16.00 |
|
3094 |
6.0MM MILL COLLET |
.06 |
16.00 |
|
3095 |
1/8" MILL COLLET |
.06 |
16.00 |
|
3096 |
3/16" MILL COLLET |
.06 |
16.00 |
|
3097 |
1/4" MILL COLLET |
.06 |
16.00 |
|
3098 |
MILL COLLET (Special Order .125 to .312) (Allow 3 weeks delivery) |
.06 |
40.00 |
|
3100 |
THREAD-CUTTING ATTACHMENT (Being able to cut threads on your lathe frees you from the expense of purchasing a lot of expensive taps and dies for non-standard size threads. Cut just about any thread, inch or metric, using this set of change gears. Hand crank wheel included) |
3 |
125.00 |
|
3200 |
INDEXING ATTACHMENT (Indexes in 5° increments, uses rack gear to turn rotation into measurable linear movement for divisions other than 5° multiples. Includes base and tailstock.) |
8 |
200.00 |
|
3217 |
GEAR TOOTH CUTTER HOLDER & HSS BLANK (Grind gear shape into tool blank and use on mill in conjunction with indexing attachment or rotary table to cut your own gears.) |
.5 |
35.00 |
|
3230 |
MILL ARBOR-7/8" DIA. (Short) (Holds round mill cutters) |
.5 |
50.00 |
|
3231 |
MILL ARBOR-7/8" DIA. (Long) (Holds round mill cutters) |
.5 |
50.00 |
|
3235 |
MILL ARBOR-1" DIA. (Short) (Holds round mill cutters) |
.5 |
50.00 |
|
3236 |
MILL ARBOR-1" DIA. (Long) (Holds round mill cutters) |
.5 |
50.00 |
|
3306 |
STD. HEADSTOCK, DC MOTOR AND SPEED CONTROL (Complete, self-contained drive unit with pulleys designed to turn the spindle at speeds up to 2800 RPM. Alternate pulley position provides more torque and a maximum spindle speed of 1400 RPM. Operates on any current 100VAC to 240VAC, 50 or 60 Hz.) | 10 | 300.00 |
|
3307 |
10,000 RPM HEADSTOCK, DC MOTOR AND SPEED CONTROL (Complete, self-contained drive unit with pulleys designed to turn the spindle at speeds up to 10,000 RPM. Alternate pulley position provides more torque and a maximum spindle speed of 2200 RPM. Operates on any current 100VAC to 240VAC, 50 or 60 Hz.) | 10 | 380.00 |
|
3400 |
OVERSIZE HANDWHEEL (2.5" diameter for easier cranking) (Metric P/N 3410) |
.12 |
15.00 |
|
3420 |
2" ADJUSTABLE ZERO HANDWHEEL (Mill Y-axis or lathe crosslide) (Metric P/N 3430) |
.25 |
35.00 |
|
3440 |
2.5" ADJUSTABLE ZERO HANDWHEEL (Mill Y-axis or lathe leadscrew) (Metric P/N 3450) |
.25 |
40.00 |
|
3460 |
2.5" ADJUSTABLE ZERO HANDWHEEL (W/Thrust & Bearing Set for Mill Z-axis) (Metric P/N 3465) |
.25 |
45.00 |
|
3480 |
VERTICAL MILLING COLUMN W/ADJ. HANDWHEEL (Metric P/N 3485) (Turns lathe into a mill in less than 30 seconds. Normally used with 4500 or 4400 lathes to match adj. Zero handwheels) |
8 |
170.00 |
|
3500 |
ROTARY COLUMN ATTACHMENT (Allows mill column to be swung up to 90° to either side for angled drilling) |
1.75 |
80.00 |
|
3551 |
MILLING VISE (Holds work for milling. Looks similar to a drill press vise, but jaw pulls down and in to keep parts from lifting during milling. Precise jaws and body can be squared up with table.) |
2.5 |
75.00 |
|
3559 |
90° ANGLE PLATE (Mounts parts 90° to table for milling, 10" long, 2 T-slots on each face) |
4 |
100.00 |
|
3560 |
MILL TOOLING PLATE (Protects mill table, pre-drilled hole pattern makes it easy to clamp parts, mount mill vise or rotary table to mill.) |
2.5 |
60.00 |
|
3561 |
SHORT 90° ANGLE PLATE (Mounts parts 90° to table for milling. 3.5" long, 2 T-slots on each face—can be mounted parallel or perpendicular to mill table) NEW 12/08! |
1 |
60.00 |
|
3570 |
ROTATING MILL VISE BASE (Holds mill vise while allowing it to be rotated 360° using laser engraved scale for angle reference) |
1 |
100.00 |
|
3575 |
ROTATING MILL VISE BASE AND MILL VISE (P/N 3551) (Save by buying vise and base at same time) |
2.5 |
165.00 |
|
3580 |
MULTI-DIRECTION DELUXE VERTICAL MILLING COLUMN (Turns your lathe into an 8-direction mill in 30 seconds) (Metric P/N 3585) |
13 |
375.00 |
|
3700 |
4" PRECISION ROTARY TABLE (72:1 worm gear divides a circle into 3600 parts without interpolation. Used for indexing radial hole patterns or milling radii or indexed flats. Used on 3701 or 3750 to index for cutting gear teeth. A mill with a rotary table is an extremely potent combination, make virtually any part possible, with size being the only limitation) |
8 |
270.00 |
|
3700-CNC |
4" PRECISION ROTARY TABLE, CNC-READY (Includes stepper motor mount ready for application of your own stepper motor and CNC controls. Handwheel also included) |
11 |
320.00 |
|
3701 |
RIGHT ANGLE ATTACHMENT (For use with P/N 3700) (Mounts rotary table perpendicular to mill table) |
3 |
75.00 |
|
3702 |
RIGHT ANGLE ADJUSTABLE TAILSTOCK (For use with P/N 3700) (Aligns with center of rotary table when mounted on 3701. Supports arbor shaft used to hold gear blanks when cutting teeth) |
2 |
75.00 |
|
37091 |
12mm to 3/8-16 ADAPTER (Allows Unimat Chuck with 12mm thread to be mounted to Sherline rotary table P/N 3700) | .25 | 15.00 |
|
37092 |
14mm to 3/8-16 ADAPTER (Allows Unimat Chuck with 14mm thread to be mounted to Sherline rotary table P/N 3700) | .25 | 15.00 |
| 37093 | 1/2-20 ROTARY CHUCK ADAPTER (Allows Sears Chuck with 1/2-20 thread to be mounted to Sherline rotary table P/N 3700) | .25 | 15.00 |
| 37094 | 3/8-24 ROTARY CHUCK ADAPTER (Allows Jacobs Drill Chuck with 3/8-24 thread to be mounted to Sherline rotary table P/N 3700) | .25 | 15.00 |
|
3725 |
ROTARY TABLE TOOLING PLATE (5.5" x 1/2" round aluminum plate with pre-drilled hole pattern for mounting parts and fixtures to the 3700 or 8700 rotary table.) | 1.0 | 45.00 |
|
3750 |
TILTING ANGLE TABLE (Mount part, mill vise, chucks or rotary table to mill any angle from 0° to 90°. In 90° position, holds rotary table at same height as 3701, eliminating the need for that part) |
2.5 |
110.00 |
|
40040 |
Replacement Drive Belt |
.15 |
8.00 |
|
4017U |
MILL SADDLE LOCKING LEVER UPGRADE (Allows Z-axis leadscrew to be locked with a lever on the leadscrew instead of tightening a screw with a hex wrench. Standard on all mills after 1998) (Metric P/N 4117U) |
.5 |
25.00 |
|
4017Z |
CNC MILL ANTIBACKLASH ADJUSTER UPGRADE (Allows the Z-axis locking lever to be positioned in partially locked positions to reduce backlash to as little as .001". Standard on CNC mills after 2/04. Can be installed as an option on any Sherline mill.)(Metric P/N 4117Z) | .5 | 35.00 |
|
4150 |
15" LATHE VINYL COVER (Protect your 4000-series lathe from dust and grit) |
.25 |
10.00 |
|
4151 |
24" LATHE VINYL DUST COVER (Protect your 4400-series lathe from dust and grit) |
.25 |
12.00 |
|
4335 |
10,000 RPM PULLEY CONVERSION (High speed position allows motor to turn spindle at a maximum of 10,000 RPM. Second belt position provides more torque and a maximum of 2200 RPM. New 2-piece standoff replaces standard motor standoffs. Installs in about 10 minutes. | 1 | 80.00 |
|
4360 |
CHIP GUARD (Clear shield contains flying chips. Pivots out of the way when not needed. Not a substitute for safety glasses) |
.5 |
15.00 |
|
4417Z |
CNC LATHE BACKLASH ADJUSTER (Installs on leadscrew to provide a way to reduce backlash during CNC operations. Similar to the 4017Z lock developed for the mill, it uses a lever which is tightened against the saddle nut to control backlash. A positioning arm holds the locking lever in any desired position. Installed on all CNC-ready lathes as of 5/04. Can be installed as an option on any Sherline lathe.) (Metric P/N 4417ZM.) NEW 5/04! | .5 | 35.00 |
|
5011U |
MILL X and Y AXIS STAR GEAR BACKLASH UPGRADE (Installs on mills made after 1997 when the pointer style backlash lock was replaced with the star gear type lock and up until July, 2004 when this change was incorporated into regular production. Includes new star gears and leadscrew nuts with finer teeth for mill X and Y axis plus new button head screws to hold the locking gear.) (Metric 5111U) | .1 | 10.00 |
|
5150 |
MILL VINYL COVER (Protects your 5000-series and 5400-series mill from dust and grit) |
.25 |
12.00 |
|
5151 |
MILL VINYL COVER (Protects your 2000-series mill from dust and grit) |
.25 |
15.00 |
|
5200 |
XY BASE (10") (Inch) (Add a 3050 vertical milling column and the motor/speed control from your lathe and you have a model 5000 mill)(Metric P/N 5210) |
17 |
260.00 |
|
5200-CNC |
XY BASE (10") CNC READY (Inch) w/ 2 stepper motor mounts for NEMA 23 frame size stepper motors. Includes mill saddle oiler for X, Y leadscrews. (Stepper motors and CNC controls not included.) (Metric P/N 5210-CNC) | 20 | 435.00 |
|
5201 |
XYZ BASE (10") (Inch) (Add the motor/speed control from your lathe and you have a model 5000 mill)(Metric P/N 5211) | 26 | 410.00 |
|
5201-CNC |
XYZ BASE (10") CNC READY (Inch) w/ 3 stepper motor mounts for NEMA 23 frame size stepper motors. Includes mill saddle oiler for X, Y leadscrews.(Stepper motors and CNC controls not included.) (Metric P/N 5211-CNC) | 27 | 685.00 |
|
5220 |
XY BASE (10") W/ ADJUST. HANDWHEELS (Metric P/N 5225) (Add a vertical milling column with adjustable handwheels and the motor/speed control from your lathe and you have a complete model 5500/5510 mill) |
19 |
335.00 |
|
5230 |
XYZ BASE (10" W/ ADJUST. HANDWHEELS (Metric P/N 5235) (Add the motor/speed control from your lathe and you have a complete model 5500/5510 mill) |
26 |
465.00 |
|
5300 |
HOME MACHINIST'S HANDBOOK by Doug Briney (275 pages, B/W, uses Sherline tools in all the setup examples, project plans included) |
2 |
25.00 |
|
5301 |
TABLETOP MACHINING by Joe Martin (The ultimate miniature machining book by Sherline's owner. All color, 8-1/2 x 11, 400+ photos, 200+ illustrations. Third printing, 11/01 includes 8 more pages and several new photos.) |
3 |
40.00 |
|
5302 |
TABLETOP MACHINING, HARDBOUND LIMITED EDITION by Joe Martin. (Red padded hard cover with gold foil title, bound-in red ribbon bookmark. Hand signed by the author. Third printing, 11/01. NOTE: $10.00 of the purchase price of each hardbound book is donated to the Joe Martin Foundation for Exceptional Craftsmanship.) | 3.5 | SOLD OUT |
|
5325 |
SHERLINE TOOLS & ACCESSORIES CATALOG, 6th Edition (48-page color catalog shows tools and accessories plus tells briefly how each is used. Current price lists enclosed.) |
.5 |
2.00 |
| 5305 | MACHINE SHOP ESSENTIALS by Frank Marlow, PE., Softbound, 7 x 10 black and white, 518 pages, copiously illustrated, for all size machine tools from Sherline on up. | 3 | 44.95 |
| 5306 | MACHINE SHOP TRADE SECRETS by James A. Harvey, Softbound, 8.5 x 11 black and white, 312 pages, Practical knowledge for all size machine tools from an experienced shop pro. | 3 | 39.95 |
| 5307 | MACHINE SHOP KNOW-HOW by Frank Marlow, PE., Softbound, 7 x 10, black and white, 520 pages, line art illustrations on every page. Features problem solving insights and practical knowledge in the machine shop while focusing on manually operated machines. |
3 |
49.97 |
|
5326 |
SHERLINE ASSEMBLY AND INSTRUCTION GUIDE, 4th Edition (44-page color instruction book included with new machines. A good basic course in machining) |
.5 |
2.00 |
|
5327 |
SHERLINE SHOP GUIDE (144 pages, B/W, 8.5 x 11" perfect bound book incorporates illustrated instructions from all of Sherline's major accessories into one volume.) |
3 |
10.00 |
|
5328-VHS |
STEAM ENGINE VIDEO by Rudy Kouhoupt (VHS tape, 3 Hrs., includes materials list and printed plans for a steam engine. Video takes you through every setup from start to finish.) While supplies last. Once gone, only the DVD version below will be available) |
2 |
69.95 |
|
5328-DVD |
STEAM ENGINE VIDEO by Rudy Kouhoupt (DVD, 3 Hrs., includes materials list and printed plans for a steam engine. Video takes you through every setup from start to finish.) |
1.5 |
72.95 |
|
5329 |
SHOP SECRETS—Using Measuring Tools by Mike Rehmus/ByVideo Productions (DVD, 112 min., tells you how each measuring tool used in machining is used and cared for. Very professionally produced. Includes promo for NAMES show too. |
1 |
40.00 |
|
5330 |
SAFETY GLASSES (A MUST in every shop. Get them from us or get them from someone else, but don't cut metal without them! These are good quality and comfortable.) |
.25 |
7.50 |
|
5335 |
SHERLINE LATHE BASICS—How to Set Up and Operate the Sherline Lathe by Mike Rehmus/ByVideo Productions (DVD, 3.6 hrs., basic setup operations, alignment, turning facing and boring plus segments on work holding, tapers, threading, removing chuck jaws, backlash and more. Segments on using a follower rest and milling on a lathe also included.) NEW April, 2008! |
.5 |
49.95 |
| 5340 | THE SHERLINE CNC LATHE—A Beginner's Guide by MakeCNC.com (DVD, 44 min., assembly and setup of a Sherline CNC lathe and basic introduction to G-code. A guide for first-time CNC users) Available January, 2009! | .5 | 27.95 |
| 5345 | The SHERLINE CNC MILLING MACHINE—A Beginner's Guide by MakeCNC.com (DVD, 53 min., assembly and setup of a Sherline CNC mill and basic introduction to G-code. A guide for first-time CNC users) Available January, 2009! | .5 | 27.95 |
|
5401 |
DELUXE XY BASE (Inch) w/ 12" Base and Adjustable Handwheels (Add a 3480 vertical milling column and the motor/speed control from your lathe and you have a complete deluxe model 5400 mill.) (Metric P/N 5411) |
19 |
380.00 |
|
5401-CNC |
DELUXE XY BASE CNC READY w/ 2 stepper motor mounts for NEMA 23 frame size stepper motors. Includes mill saddle oiler for X, Y leadscrews. (Stepper motors and CNC controls not included.) (Metric P/N 5411-CNC) | 21 | 515.00 |
|
5420 |
DELUXE XYZ BASE (Inch) w/ 12" Base and Adjustable Handwheels (Metric P/N 5430) (Add the motor/speed control from your lathe and you have a complete deluxe model 5400 mill.) |
27 |
496.00 |
|
5420-CNC |
DELUXE XYZ BASE CNC READY (Inch) w/ 3 stepper motor mounts for NEMA 23 frame size stepper motors. Includes mill saddle oiler for X, Y leadscrews. (Stepper motors and CNC controls not included.) (Metric P/N 5430-CNC) | 28 | 725.00 |
|
5600 |
Model 2000 8-DIRECTION MILL XY BASE (metric P/N 5610) (Add a multi-direction vertical milling column and the motor/speed control from your lathe and you have a complete model 2000 mill.) |
22 |
400.00 |
|
5600-CNC |
Model 2000 8-DIRECTION MILL XY BASE (metric P/N 5610-CNC) Includes mill saddle oiler for X, Y leadscrews. (Same as above except stepper motor mounts are installed on the X- and Y-axes, ready to accept NEMA 23 stepper motors. Includes two 1-5/8" handwheels for use on rear shafts of stepper motors. Motors not included.) | 23 | 575.00 |
|
5625 |
Model 2000 8-DIRECTION MILL XYZ BASE (metric P/N 5630) (Add the motor/speed control from your lathe and you have a complete model 2000 mill.) |
34 |
775.00 |
|
5625-CNC |
Model 2000 8-DIRECTION MILL XYZ BASE (metric P/N 5630-CNC) Includes mill saddle oiler for X, Y leadscrews. (Same as above except stepper motor mounts are installed on the X-, Y-, and Z-axes, ready to accept NEMA 23 stepper motors. Includes two 1-5/8" handwheels for use on rear shafts of stepper motors. Motors not included.) | 35 | 915.00 |
|
5650 |
8-DIRECTION UPGRADE for all existing SHERLINE MILLS (metric P/N 5660) (A multi-direction milling column and an offset base brings your existing mill up to the capabilities of a model 2000 mill.) |
9 |
265.00 |
|
5680 |
8-DIRECTION UPGRADE for LATHE VERTICAL MILLING COLUMN (metric P/N 5685) (Turns your lathe/vertical milling column combination into an 8-direction mill.) |
9 |
265.00 |
|
6079 |
1/4" END MILL HOLDER |
.5 |
30.00 |
|
6080 |
3/16" END MILL HOLDER |
.5 |
30.00 |
|
6081 |
1/8" END MILL HOLDER | .5 | 30.00 |
|
6100 |
HORIZONTAL MILLING CONVERSION |
11 |
130.00 |
|
6101 |
COLUMN CONVERSION (To optimize the horizontal conversion, P/N 6100, the mill column should be reworked to allow for the best set up. Contact SHERLINE for information.) |
8 |
(CALL) |
|
6700 |
CNC UPGRADE KIT, 5000 OR 5400 MILL (Metric P/N 6710) (Replaces the handwheels with stepper motor mounts, ready for the installation of your own stepper motors and CNC control.) |
2.5 |
250.00 |
|
6705 |
CNC UPGRADE KIT, 2000 MILL (Metric P/N 6715) (Replaces the handwheels with stepper motor mounts, ready for the installation of your own stepper motors and CNC control.) |
2.5 |
250.00 |
|
67127 |
STEPPER MOTOR, 2 amp, #23 Frame, dual shaft, 6-wire, 136 oz-in stall
torque, pre-wired with plug for use with Sherline rotary or linear controller,
flats pre-machined for Sherline coupler and handwheel set screws. |
1 |
75.00 |
|
67130 |
STEPPER MOTOR, 2 amp, #23 Frame, dual shaft, 6-wire, 136 oz-in stall torque, 6-wire plug-in harness with raw leads for use on applications that do not have the Sherline 5-pin connector plug, flats pre-machined for Sherline coupler and handwheel set screws. |
1 |
65.00 |
|
6720 |
CNC UPGRADE KIT, 4000 or 4500 LATHE (Metric P/N 6725) (Replaces the handwheels with stepper motor mounts, ready for the installation of your own stepper motors and CNC control.) |
2 |
200.00 |
|
6730 |
CNC UPGRADE KIT, 4400 LATHE (Metric P/N 6735) (Replaces the handwheels with stepper motor mounts, ready for the installation of your own stepper motors and CNC control.) |
2 |
210.00 |
| 6740 | CNC UPGRADE KIT, 5000 and 5400 Series Mills, Z-axis only (Metric P/N 6745) | 1.5 | 100.00 |
| 6750 | CNC UPGRADE KIT, 2000 Series Mills, Z-axis only (Metric P/N 6755) | 1.5 | 100.00 |
| 6760 | CNC UPGRADE KIT, mill X axis or lathe Crosslide only (all models) (Metric P/N 6765) | 1 | 75.00 |
| 6770 | CNC UPGRADE KIT, mill Y axis only (all mill models) (Metric P/N 6775) | 1 | 75.00 |
|
6780 |
CNC UPGRADE KIT, leadscrew axis only, 4000/4500-series lathes (Metric P/N 6785 |
1 |
130.00 |
|
6790 |
CNC UPGRADE KIT, leadscrew axis only, 4400-series lathes (Metric P/N 6795) |
1 |
140.00 |
|
7505 |
SET OF MACHINIST'S PARALLELS (Sets of two parallel bars in five different sizes sized for miniature machine tools. Used to support work a known distance above and parallel to the table.) |
.25 |
30.00 |
| 7550 | Super-Lube multi-purpose synthetic grease with Syncolon® (PTFE), 3 oz tube (Teflon-based grease that we use at the factory on all new machines. Clear, non-staining, heat resistant.) | .25 | 6.50 |
| 7555 | Super-Lube dri-film spray lubricant with Syncolon® (PTFE), 11 oz aerosol can (Teflon-based film that sprays on. Once propellant dries, it leaves a thin coat of dry teflon lubricant that won't attract chips.) | 1 | 9.50 |
|
7560 NEW! |
NIKX-STIKX metal cutting compound, 2.2 oz stick (Rub on drills, end mills, slitting saw and band saw blades, etc. for smoother cuts and longer lasting tool sharpness) | .12 | 5.00 |
|
7600 |
3/8" INSERT HOLDER TOOL POST (Has side slot to hold 3/8" shank cutting tool holders plus a 3/8" round hole to hold round boring bars.) |
.25 |
20.00 |
|
7610 |
55° NEGATIVE RAKE INSERT HOLDER w/ insert (Holds carbide tips for cutting hard materials like stainless steel. 5° angle provides negative clearance for the cutter, which is supported all the way down to the table for rigidity.) |
.5 |
60.00 |
|
7611 |
55° DIAMOND TIPPED INSERT, fits in standard Sherline 3/8" tool holders designed to hold 55° carbide inserts | .05 | 105.00 |
|
7612 |
REPLACEMENT 4-SIDED CARBIDE INSERT TOOL (for 7610) |
.06 |
17.00 |
|
7620 |
SINGLE FLUTE INSERT FLY CUTTER (Carbide insert cuts hard materials. Also is a good compromise between a fly cutter and an end mill, because it will cut a 1-1/8" wide path while still being able to cut right up to a shoulder.) |
.5 |
60.00 |
|
7622 |
REPLACEMENT 2-SIDED CARBIDE TIP (for 7620) |
.06 |
15.52 |
|
8100 |
3-AXIS DIGITAL READOUT w/ RPM GAGE FOR MILL, 120 VAC* (inch) (Metric P/N 8160) (Reads table position to .0005", electronic compensation for backlash) |
3 |
375.00* |
|
8200 |
2-AXIS DIGITAL READOUT w/ RPM GAGE FOR LATHE, 120 VAC* (inch) (Metric P/N 8260) (Reads table position to .0005", electronic compensation for backlash) |
3 |
325.00* |
|
8210 |
3-AXIS DIGITAL READOUT w/ RPM GAGE FOR LATHE and VERTICAL MILLING COLUMN, 120 VAC* (Inch) (Metric P/N 8215) (Reads table position to .0005", electronic compensation for backlash) |
3 |
385.00* |
| *NOTE: For 240 VAC power supply instead of 120 VAC on any DRO add $24.00. | |||
|
8220 |
2-AXIS DIGITAL READOUT w/ RPM GAGE FOR LATHE without READOUT BOX (For those who already have a Mill DRO package) (Inch) (Metric P/N 8225) (Reads table position to .0005", electronic compensation for backlash) |
2 |
165.00 |
|
8240 |
Z-AXIS VERTICAL MILLING COLUMN DIGITAL READOUT HANDWHEEL PACKAGE (Inch) (Metric P/N 8245) (Adds third readout for those who bought 2-axis DRO and later add a vertical milling column.) |
.5 |
65.00 |
|
8700 |
CNC ROTARY INDEXER w/ CONTROLLER, STEPPER MOTOR, MOUNT, POWER SUPPLY, CABLES, 4" ROTARY TABLE AND HOLD-DOWNS (Inch) (Stand-alone system with its own built-in computer is user programmable. A computer controlled stepper motor indexes the rotary table to within ±.006°. Can be daisy-chained with linear controller to do gear cutting.) |
17 |
725.00 |
|
8710 |
CNC ROTARY INDEXER RISER PLATE (On the 3700-CNC and 8700 CNC rotary tables, the bottom of the stepper motor mount extends slightly below the bottom surface of the table. On Sherline mills, the mount overhangs the side of the table so this is not a problem. On larger mills or flat table applications a riser plate is needed so that the stepper motor clears the table surface.) | 2 | 25.00 |
| 8730 | CNC ROTARY TABLE WITH STEPPER MOTOR (Stepper motor plugs into 4th axis cable of 8760 driver box or Sherline 8540 or 8020 CNC system to act as 4th axis. Includes prewired plug. | 10 | 395.00 |
| 8760 | CNC 4-AXIS DRIVER BOX (Includes 4 cables for X, Y, Z and A (Rotary) axes, power supply and parallel cable for attachment to computer's printer port. Linux OS and EMC 4-axis softare also included on two CD's. Buy or upgrade a CNC-ready Sherline machine, buy the needed P/N 67127 stepper motors, plug in and attach to your computer with Linux/EMC installed and you have the duplicate of a complete Sherline CNC system. NOTE: one hour of free technical support provided with Sherline CNC system is NOT provided when driver box is purchased separately.) | 7 | 600.00 |
| 8765 | Upgrade any CNC-ready Sherline lathe to CNC (Computer not included.) Save over $600 compared to complete systems with computer. Includes 2 stepper motors, 4-axis 8760 driver box and Linux/EMC software on CD. Does NOT include software installation and technical support. | 12 | 730.00 |
| 8770 | Upgrade any CNC-ready Sherline lathe to CNC (Computer not included.) Save over $600 compared to complete systems with computer. Includes 2 stepper motors, 4-axis 8760 driver box and Linux/EMC software on CD. Does NOT include software installation and technical support. | 15 | 805.00 |
| 8775 | Upgrade any CNC-ready Sherline shop package to CNC (Computer not included.) Save over $600 compared to complete systems with computer. Includes 5 stepper motors, 4-axis 8760 driver box and Linux/EMC software on CD. Does NOT include software installation and technical support. (To upgrade manual 3700 rotary table ask to substitute 8730 table with stepper motor for additional charge of $125.00) | 16 | 935.00 |
|
8800 |
CNC LINEAR CONTROLLER w/ STEPPER MOTOR (Inch) (Stepper motor bolts onto Sherline CNC-ready stepper motor mounts. Controller drives stepper motor to move any axis on lathe or mill. From .0005" to 9.9995". Will work on any lathe or mill axis that already has a stepper motor mount installed. Includes power supply and cable. Can be daisy chained with other Sherline linear or rotary controllers.) |
5 |
450.0 |
|
8850 |
CNC MILL OR LATHE POWER FEED (MILL X- or Y-AXIS or LATHE CROSSLIDE) w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES AND POWER SUPPLY (Replaces handwheel on X- or Y-axis of mill or lathe crosslide with stepper motor mount and stepper motor. Motor is driven by self-contained computer/keypad unit and power supply to allow movement from .0005" to 9.9995". Includes drill block for locating mounting holes. Can be daisy chained with other Sherline controllers) Inch version only |
6 |
500.00 |
|
8860 |
CNC MILL POWER FEED (Z-AXIS, 5000/5400 MILLS) w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES, POWER SUPPLY AND REPLACEMENT Z-AXIS LEADSCREW (Replaces handwheel on Z-axis of mill with stepper motor mount and stepper motor. Motor is driven by self-contained computer/keypad unit and power supply to move Z-axis in programmable .0005" increments up to full length of travel. Includes drill block for locating mounting holes. Can be daisy chained with other Sherline linear or rotary controllers.) Inch version only | 7 | 510.00 |
|
8865 |
CNC MILL POWER FEED (Z-AXIS, 2000 MILL) w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES, POWER SUPPLY AND REPLACEMENT Z-AXIS LEADSCREW (See description for 8860 above) | 7 | 510.00 |
|
8870 |
CNC LATHE LEADSCREW POWER FEED, 4000/4500 LATHES, w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES, POWER SUPPLY AND REPLACEMENT 15" LEADSCREW (Replaces handwheel on long leadscrew of lathe with stepper motor mount and stepper motor. Motor is driven by self-contained computer/keypad unit and power supply to move the saddle from .0005 to 9.9995". Includes drill block for locating mounting holes. Can be daisy chained with other Sherline linear or rotary controllers.) Inch version only | 7 | 520.00 |
|
8880 |
CNC LATHE LEADSCREW POWER FEED, 4400 LATHES, w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES, POWER SUPPLY AND REPLACEMENT 24" LEADSCREW (See description for 8870 above.) | 7 | 530.00 |
|
8900 |
HIGH SPEED ENGRAVING HEAD AND SPINDLE, Includes headstock, spindle, 3 carbide engraving cutters, 7 grinding tools, 2 collet wrenches, 6' air line and lubricator fitting. (For turning 1/8" carbide engraving cutters at speeds up to 54,000 RPM. Replaces standard Sherline DC motor and headstock unit.) NEW 8/06! | 3.5 | 245.00 |
|
8976 |
TOOL POST for 8900 High speed grinder, Mounts to lathe table to hold 8900 grinder horizontally as a tool post grinder. NEW 11/06! | .25 | 35.00 |
|
8987 |
RISER TOOL POST for 8900 high speed grinder, taller post mounts to lathe table to hold 8900 grinder horizontally when lathe has riser blocks in place. NEW 11/06! | .5 | 40.00 |
| Home Page
| About Sherline | Testimonials
| Lathes | Mill |
| Accessories | Dealers | CNC Dealers | Tool Prices | Contest | Full Size Tools |
| SHERLINE Weight Scales | IMMA | Resources
| SHERLINE People |