Shown above is the long bed 4400 lathe (with "A" chuck package) configured with stepper motor mounts installed on the leadscrew and crosslide axes. (Click photo for larger image.)
Sherline lathes can be
retrofitted for CNC-use. Lathes can also be ordered with stepper motor mounts
factory installed. Note that Sherline provides only the mounts and couplers. The
customer is responsible for completing the system with the purchase of stepper
motors, drivers, a computer and software. Some prefer to build their own system
from off-the-shelf parts, while some prefer to go with a package from one of our
aftermarket suppliers. (See our list of CNC SUPPLIERS for details.)
Sherline stepper motor
mounts accept a #23 frame size stepper motor. The motor is attached to the
housing and the shaft is connected to the Sherline coupler. A dual-shaft motor
can be used. Spare handwheels are provided for installation onto the rear shaft
of a dual-shaft motor so that hand control can be maintained if desired.
|
P/N |
Shipping Wt. | Price |
| 4000CNC/4100CNC | 26 lb. | $775.00 |
| 4400CNC/4410CNC | 31 lb. | $855.00 |
(CNC-ready mills also available with A, B or C accessory packages.)
READ INSTRUCTIONS FOR SETTING UP A LATHE OR MILL
READ INSTRUCTIONS FOR USING A LATHE
READ INSTRUCTIONS FOR INSTALLING CNC STEPPER MOTOR MOUNTS ON A LATHE
Lathes can now be purchased packaged with chucks and other preselected groups of accessories. See the page on PACKAGE DEALS. Save time and money by buying a package.
RETURN TO LATHES PAGE
VIEW MILLS PAGE
RETURN TO SHERLINE'S HOME PAGE
| Home
Page | About
Sherline | Frequently
Asked Questions | Testimonials
| Lathes
|
| Mills
| Accessories
| Dealers
| Tool
Prices | Accessory
Prices |
| Contest
| Full
Size Tools | SHERLINE
Weight Scales | Race
Car Alignment System |
| IMMA
| Resources
| SHERLINE
People |