Many other useful manual and CNC slide configurations can be found at www.sherlineIPD.com along with a selection of headstocks and spindles for general tooling use.
| P/N | NAME | WT. | PRICE |
| 6554 | CNC 8" Single Axis slide with Programmable CNC Contoller | 7.5 lb. | $670.00 |
| 6559 | CNC 13" Single Axis slide with Programmable CNC Controller | 8 lb. | $715.00 |
Sherline offers a line of industrial slides and spindles that make it easy to build up and control manual or CNC movements for production or home shop use. Show here as an example is the 8" single axis slide with a stepper motor mount. Included are the stepper motor and a controller with a built in driver to program and run it. The controller allows you to program in table movement controlling speed, direction and distance right from the keypad. No knowledge of G-code is required. Included is the power supply and connecting cable as well as an extra half cable for "Daisy-chaining" one or more linear or rotary controllers together for sequential moves. To learn more about how the controller works, see the links to the instructions below. (The controller and motor by itself are sold as P/N 8800 and 8850 through Sherline.)
The 6554 8" slide has 4" of table travel. This slide is also available in a 13" length for an additional 5" of travel as P/N 6559. At this time there are no metric versions of this controller offered--it is programmed in inches only. The table and T-slots feature the standard Sherline layout of 1.5" on centers and can be used with Sherline T-nut accessories. The slide is mounted to your base by means of four 1/2-20 holes in the bottom of the base. A screw activated slide lock is also provided.
Sherline lists the parts sold through the Industrial Products Division on another web site at www.sherlineIPD.com that goes into much more detail. Also offered are two-axis and 6-direction slides in manual or CNC-ready versions plus cartridge spindles and headstocks with or without a DC motor and speed control. A kit to drive your spindle using a stepper motor is also available as P/N 6500.
READ INSTRUCTIONS FOR PROGRAMMING AND USING THE CNC CONTROLLER:
PDF version (Requires Adobe Acrobat program to view)
RETURN TO ACCESSORIES MASTER LIST
Shop for Sherline LATHES
Shop for Sherline MILLING MACHINES
Shop for Sherline CHUCKS
RETURN TO SHERLINE'S HOME PAGE
| Home
Page | About
Sherline | Frequently
Asked Questions | Testimonials
| Lathes
|
| Mills
| Accessories
| Dealers
| Tool
Prices | Accessory
Prices |
| Contest
| Full
Size Tools | SHERLINE
Weight Scales | Race
Car Alignment System |
| IMMA
| Resources
| SHERLINE
People |