Oversize 2.5" Handwheel, P/N 3400 (inch) or 3485 (metric)

Using a larger handwheel can give a tool a more substantial feel and make cranking easier. These large 2.5" handwheels have the same number of graduated markings as the standard 1-5/8" or 2" handwheels but offer a "beefier" feel. They can be used on the lathe or mill. (They are not recommended for use on the lathe tailstock as they will interfere with the leadscrew handwheel if oversize handwheels are used on both.)

When upgrading handwheels, consider also the adjustable "zero" handwheels. They are available in 2" and 2.5" diameters and can make keeping track of dimensions easier.

READ INSTRUCTIONS FOR USING THE TOOL HEIGHT GAGE:

.html Version only (Web site version)